How do I access IMM on IBM server?

How do I access IMM on IBM server?

Open a Web browser. In the address field, type the IP address of the IMM to which you want to connect. The Enter Password window opens. Use the default login ID value of USERID and password value of PASSW0RD (with a zero instead of O) to sign on.

How do I change the IP address of an IBM IMM?

Network Configurations from the IMM Web Interface

1. Log in to the user interface of the IMM of your appliance.
2. Click IMM Control > Network Interfaces.
3. A form displaying the current network configuration, which may take a moment to load, will be displayed.
4. Click Save.
5. Click IMM Control > Restart IMM.

How do I connect to my IMM port?

In the Address Bar area of the browser window, type the default IMM port IP address: 172.31. 1.254 (or 192.168. 70.125 if the IMM is new), and then press Enter. In the Login window, enter USERID as the username and PASSW0RD (with a zero) as the password, and then click OK.

How do I reset an IBM IMM?

To restore the IMM2 factory defaults, complete the following steps:

1. Log in to the IMM2.
2. Click the IMM Management tab; then, click IMM Reset to factory defaults….
3. Click the OK button on the Confirm Reset to factory defaults window (as shown in the following illustration).

What is IMM port?

The Integrated Management Module (IMM) can be accessed through two available network ports. The first is called the Dedicated port. This port is a system management (SYS MGMT) port, which operates only in Dedicated mode. The second port is called the Shared port.

How do I access IMM Qradar?

Procedure

1. Log in to the IMM2 using the IP address assigned to the interface.
2. Select IMM Management > Activation Key Management.
3. From the Activation Key Management page, click the Add button.
4. Click on Select File and add the key file downloaded.
5. When prompted by the success message, click OK.

How do I reset my IBM IMM password?

Reset IMM Password Remotely Remotely connect to your IBM server Download the IBM ASU Utility (Note: There’s an x64 bit version, and an x32 bit version, run the correct one to extract the tools). Note: If it returns a different username you can check each login ID and reset them one by one.

How do I change the password on my Lenovo IMM?

To change the password for the slot #1 position user, you can run the following command:

1. IMM: /opt/lenovo/toolscenter/asu/asu64 set IMM. Password. 1 [new_password] –kcs.
2. XCC: /opt/lenovo/lnvgy-utl-lxce-onecli/onecli config set IMM. Password. 1 [new_password]

How do I change my IBM IMM password?

How do I reset my IBM x3650 m3?

To restore factory default settings, do the following steps:

1. On the ASMI Welcome pane, specify your user ID and password, and click Log In.
2. In the navigation area, expand System Service Aids.
3. Select Factory Configuration.
4. Select the options that you want to restore to factory settings.
5. Click Continue.

How do I access Qradar IMM?

How to locate your ‘Machine Type’ and ‘Serial Number’ information

1. Using an SSH session from the Console type the command: /opt/qradar/support/deployment_info.sh -HO.
2. If you can boot the host, you can type the following command to get :#dmidecode -t 1.

How do I reset my IMM to factory settings?

How do I reset my IMM?

How to reset/reboot server iMM interface

1. Log into the active management file module using root.
2. If this is the file module requiring action, then continue with step 3. If this is not thefile module to reset:
3. Type asu rebootimm –kcs and press Enter.

How do I reset my IBM IMM?

How do I reset my Lenovo server IMM?

To restart the IMM from the UEFI screen, boot the server and press “F1” when prompted. From the “System Configuration and Boot Management” page, select System Settings, Integrated Management Module, Reset IMM.

How do I reset my IMM credentials?

What is the default IP address for the IMM?

The server comes with a default IP address for the IMM of 192.168.70.125. Obtaining the IP address for the IMM – IBM System x3550 M3 Obtaining the IP address for the IMM

How do I access the web interface for IMM?

To access the web interface, you need the IP address for IMM. You can obtain the IMM IP address through the Setup utility. The server comes with a default IP address for the IMM of 192.168.70.125.

How do I configure the integrated management module (IMM)?

If you have set both a power-on password and an administrator password, you must type the administrator password to access the full Setup utility menu. From the Setup utility main menu, select System Settings. On the next screen, select Integrated Management Module. On the next screen, select Network Configuration.

Why is Imm Dynamic Domain Name System (DDNS) not working?

The Integrated Management Module (IMM) Dynamic Domain Name System (DDNS) feature may not work when the network interface is configured to use static Internet Protocol (IP) configuration. IBM has tested the feature and found that there is an issue with the configuration. This RETAIN tip demonstrates how to set up IMM and name the server.