Which way does a sequential shifter go?
Of course, in motorsport and among most driving/car enthusiast circles, the generally accepted “correct” orientation for automatic sequential gear shifters is “push up and away to shift down, pull down and towards yourself to shift up.” It makes sense, right?
How expensive is a sequential gearbox?
Our sequential shifters cost around 2000 USD depending on conversion rates, you can get the current price here https://s1sequential.com/product/sequential-shifter-t56-gm/ . All variants are priced the same.
What is Open Sim wheel?
The Open Sim Wheel is a powerful direct-drive steering system for sim racing. By attaching a wheel directly to a powerful servo motor, strong and detailed force feedback can be achieved.
How long does it take to 3D print a sequential shifter?
Thanks for your interest in my DIY 3D printable Racing Sim sequential shifter. The idea was to design it to be strong & long lasting, but also cost effective and without any special components required. In total, print time will be about 1.5 days, and require around 500 grams of filament.
What is the best way to print main shifter body?
Main Shifter Body is printed standing upright, and with relatively high wall count and infill percentage, as the top section is under quite a bit of force when you smash through gears, particularly while in an aggressive race. I suggest 3 walls and around 50% infill. (Support material is recommended for this part)
How do I connect my new shifter to my PC?
Once your new shifter is firmly affixed to your rig, connect the USB cable to your PC, open Windows Game Controllers by typing “joy.cpl” in the windows start menu, and verify your shifter is detected as a Joystick. Now, launch your sim game of choice, map your shift up/down keys and enjoy your racing!
How do I add a shifter to my racing sim rig?
These can be used to affix to your racing sim rig, you will need to find some form of bracket / plate to suit your particular rig. Once your new shifter is firmly affixed to your rig, connect the USB cable to your PC, open Windows Game Controllers by typing “joy.cpl” in the windows start menu, and verify your shifter is detected as a Joystick.