How do I update my Arris router software?
To do this:
- From the Setup page on the router interface, select Status.
- Choose Router Upgrade from the drop-down menu.
- Select Browse and navigate to the file you just downloaded.
- Select Upgrade and confirm.
- The file will be uploaded and installed. Do not switch off the router until the upload is complete.
How do I check my modem software?
How do I view the firmware version of my cable modem or modem…
- Launch a web browser from a computer or mobile device that is connected to your network.
- Enter your cable modem or modem router’s user name and password. The user name is admin.
- Select ADVANCED. The firmware version displays.
How do I find my Arris modem IP address?
Open a web browser and visit your router’s IP This is the Arris router IP address that is used to connect to the admin panel. If that address doesn’t work, try one of these alternate Arris IPs, in order: http://192.168.100.1. http://192.168.1.1.
How do I access my cable modem settings?
To view the status of your cable modem or modem router initialization:
- Launch a web browser from a computer or mobile device that is connected to your network.
- Enter your cable modem or modem router’s user name and password. The user name is admin.
- Select Cable Connection. The cable connection information displays.
Do modems automatically update?
In many cases, your modem will install updates automatically. However, if your equipment isn’t performing properly, it’s worth checking to make sure the firmware is up to date. You can do this through the Utilities section of your modem’s online settings.
How do I manually configure my Arris cable modem?
– Model – Wi-Fi cable modem model name – SSID – Default network name for your Wi-Fi home network. – WI-FI SECURITY KEY – Wi-Fi network password to connect to your Wi-Fi home network. – S/N – Wi-Fi cable modem serial number. – HFC MAC ID – Your service provider may request the Media Access Control (MAC) number to activate your Wi-Fi cable modem.
What can one do with an arris cable modem?
What the different Arris modem lights are,
How to set Arris modem to router mode?
a. Enter admin in the Username field. b. Enter password in the Password field. c. Click the Login button. The System Basic Setup page appears. Click the LAN Setup tab on the top menu. The LAN Settings page appears. On the LAN Settings page: a. NAT Mode – Click on the drop-down, and select Bridged. b. Click the Apply button.
How do I connect my phone to my Arris modem?
Select Your Modem