How do I set the default port on my Brocade switch?

How do I set the default port on my Brocade switch?

Resetting the Brocade FC switch to factory defaults

1. Log in to the switch as an administrator.
2. Disable the Brocade Virtual Fabrics (VF) feature:
3. Disconnect the ISL cables from the ports on the switch.
4. Disable the switch:
5. Disable the configuration:
6. Clear the configuration:
7. Save the configuration:

How do you set the trunk port on a Brocade switch?

Steps

1. Configure the port speed: portcfgspeed port octet_combo.
2. If more than one ISL for each fabric is used, enable trunking by issuing the following command for each ISL port: portcfgtrunkport port-number 1.
3. Enable QoS traffic by issuing the following command for each of the ISL ports: portcfgqos –enable port-number.

How do I set up a new Brocade SAN switch?

Creating your file…

1. Overview.
2. Prepare for the MetroCluster installation.
3. Choose the correct installation procedure for your configuration.
4. Cable a fabric-attached MetroCluster configuration.
5. Configure hardware for sharing a Brocade 6510 FC fabric during transition.
6. Configure the MetroCluster software in ONTAP.

How I know my port status?

How to track MNP status online

1. To check MNP status, go to the MY Port Status (Zone – 1) or Know Your Porting Status (Zone – 2).
2. Next, enter your mobile number.
3. Then enter the UPC code.
4. Next, click on I am not a robot for verification.
5. Then, tap on the MNP Status button to check your MNP status online.

What is N port in SAN switch?

An N_port is a Fibre Channel device (as opposed to switch element) that communicates using the point-to-point link level protocol. It can be attached to either another N_port, or to an F_port. An NL_port is an FC device (as opposed to switch element) that communicates using the arbitrated loop link level protocol.

How do I configure a port?

Port configuration starts with the basics of duplex and speed. Sometimes switch ports must manually have their duplex mode and speed manually configured….Table 2-5 Cisco Switch Auto-MDIX Commands.

How do I set port settings?

Set Up Port Forwarding

1. Log in to the router as admin.
2. Locate the port forwarding options.
3. Type the port number or port range that you want to forward.
4. Choose a protocol, either TCP or UDP ports.
5. Type the static IP address you chose.
6. Enable the port forwarding rule with an Enable or On option.

What is SIM port?

Mobile number portability (MNP) is a service that allows a cellphone or smartphone customer to change telecom carrier and keep the same phone number. The lack of number portability between wireless carriers has kept many consumers in India from changing cell phone service providers.

How do I port a number?

Here’s how the porting process works:

1. Let your current provider know that you’ll be porting out. You can contact your provider’s support team to let them know that you’re switching providers.
2. Send the following information to your new provider.
3. Your new carrier will notify you about the port date.

What is an ISL port?

In the VSX solution topology, an Inter-Switch Link (ISL) is a layer 2 interface between two VSX peer switches. Each VSX switch must be configured with an ISL link connected to its peer VSX switch.

How many ports does the ds-6520b have?

The DS- 6520B is configurable in 48, 72, and 96 ports in an efficient 2U form factor. Simplified deployment and a point-and-click user interface make the DS- 6520B both powerful and easy to use. The DS-6520B can also provide in flight compression and encryption for ISL connections.

What is the ds-6520b ez switchsetup documentation set?

This Documentation Set provides information for setting up, adminisering, and/or configuring the DS-6520B. This document is only available in English. This documentation set provides brief information for setting up, administering, and/or configuring the EZ SwitchSetup for the DS-6520B. This document is only available in English.

What is the performance of the ds-6500b switch?

The Connectrix DS-6500B series switches deliver up to 16 Gigabits per second (16Gb/s) Fibre Channel (FC) performance. The DS-6500B switches scale from twelve to ninety-six ports. DS -6500B 16Gb/s Fibre Channel Switch Models

What is the Connectrix ds-6510b?

The Connectrix DS-6510B is a 1U 48-port Fibre Channel (FC) Switch. With ports-on-demand the DS- 6510B can scale from 24 to 36 or 48 ports. The model has two hot-swappable, redundant integrated power supplies and fan FRUs.