How much HP does a LS2?
400 hp
Delivered from the factory in the base C6 Corvette, SSR, GTO, or as a crate engine from GM Performance Parts, the LS2 delivers an honest 400 hp and 400 lb-ft of torque.
How much horsepower does a 2007 Corvette LS2 have?
400 horsepower
The LS2 V8 displaces 6.0 liters (364 cubic inches) and generates 400 horsepower and 400 pound-feet of torque. That’s just 5 hp less than the previous-generation Z06 engine. The Corvette can accelerate from 0-60 mph in 4.2 seconds and cover the standing quarter-mile in 12.5 seconds.
How much HP does a 6.0 LS2 make?
390-395 hp.
LS Family = Gen. 4, 6.0L, Aluminum Block, Car Engines
| Performance Specifications | |
|---|---|
| Compression Ratio | 10.9 : 1 |
| Horsepower Rating | 390-395 hp. |
| Torque Rating | 400 ft./lbs. |
How much horsepower does a 6.0 LS2 have?
Is an LS2 a good motor?
The LS2 also has the convenience of being one of the most adaptable engines, with the ability to fit LS1, LS6, LS3, and L92 cylinder heads. In summary, the LS2 is clearly the better all-around package from the factory.
Whats better LS2 or LS3?
While the LS2 was provided with a 6-liter capacity, the LS3 receives an increased displacement of 6.2-liters. Despite the two engines having an identical stroke of 92.0mm, GM achieved an additional 12 inches of displacement by providing the LS3 with a larger bore.
How much horsepower can a stock ls2 block handle?
To answer your question I’d say 600rwhp is safe on a stock motor and 650 if you add a cam and fuel system.
What are the specs of the new LS2 Corvette?
The new LS2 engine has a power output of 400 hp (298 kW) at 6,000 rpm and 400 lb⋅ft (542 N⋅m) of torque at 4,400 rpm. Like the C5, the Corvette C6’s suspension consisted of independent unequal-length double wishbones with transverse fiberglass mono-leaf springs and optional magnetorheological dampers .
What kind of engine does a Corvette LS3 have?
Figure 7. Corvette LS3 engine. In 2008 the base model was upgraded to the LS3 V-8 engine with 6.2L (376 ci), which is rated at 430 hp and 424 lb-ft of torque. Adding the optional high-performance exhaust system improved these specs to 436 hp and 428 lb-ft of torque.
Is the LS3 C6 any good?
No crap. It’s a turbocharged I6. Though, it actually would only make about 350hp or so, which would still put it behind the LS2 C6 on this page. But just so you know, the base LS3 C6’s have gone mid 11’s and made over 400whp with just a tune and I don’t think tune only R34’s have done that.
How much horsepower does a Chevy LS2 small block have?
The LS2 also featured an increase in cylinder bore dimensions from 3.90 inches to 4.00 inches. This initial Gen IV small-block was capable of producing 400 horsepower at 6,000 RPM, and churning out an impressive 400 lb./ft. of torque at 4,400 RPM.