Is CZ P09 good?
The CZ P09 is a good shooter and definitely the best value in polymer DA/SA pistols but don’t expect it to shoot like a CZ Shadow 2 and only cost a third of the price.
Is the CZ P09 Optic ready?
P-09 Optic Ready is a replica with Gas Blow Back recoil system….The set includes:
| Velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | ~330 |
|---|---|
| Barrel thread type | 14mm CCW |
Is the CZ P07 A good gun?
So, the bottom line: The CZ P07 is a great duty pistol for real life, and if you’re in the market for a DA/SA polymer gun, it’s worth taking a look at. On paper, though, it loses out to a lot of other common quality pistols like Glock, Sig, and S&W.
Did CZ discontinue the P-07?
Discontinued 2018. Introduced in 2009, the CZ P-07 was the first handgun to feature the convertible Omega trigger system.
How much does a CZ P-07 weigh?
27.7 oz.
Weight: 27.7 oz. Finish: Black Nitride. Safety: Interchangeable Ambidextrous, Decocker/Manual Safety, Safety Stop on Hammer, Firing Pin Block Safety. Capacity: 15+1.
What is the difference between the CZ p07/p09 and CZ SP01 Phantom?
Unlike the CZ SP01 Phantom, the CZ P07/P09 were built from the ground up around the CZ Omega trigger systems. The slide and frame on the P07/P09 look sleek, modern, and purpose-built. The CZ P09 differs from the P07 only in capacity/grip length and barrel/slide length. Besides that, the guns are identical in feel and function.
Why does the CZ P09 have such a short slide?
That short slide gives the visual illusion that the CZ P09 has an extremely low bore axis. The low bore axis on CZ guns is actually a myth. You measure the bore axis from the highest point of the web of your hand to the top of the slide and the size of the slide itself does not play a direct role.
Can You reverse the magazine release on a CZ P09?
You can reverse the magazine release to the other side of the gun if you’re left-handed. The slide stop on the CZ P09 also functions as a takedown lever. Similar to the docker and thumb safety it sits close to ⅛ of an inch off the gun and very high on the slide.
How do you remove the barrel from a CZ P-09?
The P-09 field strips just like every other CZ pistol: line up the line on the slide with the line on the frame, push/pull the slide lock out, then slide the slide off the front of the frame. Pop out the guide rod along with its captive recoil spring and lift out the barrel, and you’re done.