What kind of engine does a Cadillac DeVille have?
Used 2000 Cadillac DeVille Specs & Features
| Engine | |
|---|---|
| Base engine size | 4.6 L |
| Cylinders | V8 |
| Base engine type | Gas |
| Horsepower | 300 hp @ 6,000 rpm |
Is Cadillac DeVille front wheel drive?
The last model marketed specifically as a DeVille was the 2005 full-size sedan, at the time, Cadillac’s largest model….Cadillac de Ville series.
| Cadillac DeVille | |
|---|---|
| Class | Full-size luxury car |
| Layout | FR layout (1959–1984) Transverse front-engine, front-wheel drive (1985–2005) |
| Chronology | |
| Predecessor | Cadillac Series 62 |
What Motor came in a 2004 Cadillac DeVille?
4.6-liter Northstar V-8
The base and DHS versions are equipped with Cadillac’s 275-horsepower, 4.6-liter Northstar V-8, while a 300-hp version of that engine is installed in the DTS.
How much horsepower does a 2004 Cadillac DeVille have?
275 to 300 hp2004 Cadillac DeVille / Horsepower
What is the torque on exhaust manifold bolts?
To install: Install a new gasket and the exhaust manifold. Torque the bolts is sequence to: 89 inch lbs. (10 Nm).
What do you torque Flexplate bolts to?
Torque all bolts to 60 ft./lbs.
What year did Cadillac stop using the Northstar engine?
2011
GM ceased production of the Northstar in 2011. The final cars to receive it, the Cadillac DTS, Buick Lucerne, and Cadillac STS, rolled off the line in 2011.
How fast is a 2004 Cadillac DeVille?
According to ProfessCars™ estimation this Cadillac is capable of accelerating from 0 to 60 mph in 6.9 sec, from 0 to 100 km/h in 7.2 sec, from 0 to 160 km/h (100 mph) in 17.6 sec, from 0 to 200 km/h (124 mph) in 29.9 sec and the quarter mile drag time is 15.1 sec.
How tight should exhaust bolts be?
Registered. Using a long 1/2 inch swivel socket, tighten the top nut of the front cylinder head exhaust flange to 9-18 in-lbs (1-2 Nm). Tighten the bottom nut to 100-120 in-lbs (11.3-13.6 Nm). Final tighten the top nut to 100-120 in-lbs (11.3-13.6 Nm).
Do you use Loctite on flexplate bolts?
Make sure to you ptfe or a teflon paste on the flexplate bolts with the blue or red loctite.
How much horsepower can a Northstar engine handle?
The 4.6L motor is reasonably powerful right out of the box, delivering between 275 and 300hp in stock trim for front-wheel drive applications and between 320 (naturally-aspirated) and 469 (supercharged) when found in rear-wheel drive vehicles.