What is bridge mode mikrotik?
The bridge feature allows the interconnection of hosts connected to separate LANs (using EoIP, geographically distributed networks can be bridged as well if any kind of IP network interconnection exists between them) as if they were attached to a single LAN.
What is the difference between VLAN and interface VLAN?
Virtual LANs ( VLANS ) are networks segments on a switched LAN. Inter-VLAN routing refers to the movement of packets across the network between hosts in different network segments.
Can you bridge VLANs?
The VLAN & Bridge application allows you to configure groups of ports independent of their physical location as a virtual LAN. This arrangement is called a logical grouping the logical group is called a virtual LAN (VLAN). Ports or groups of ports in a VLAN are called VLAN members.
What is bridge configuration?
Bridging is a feature that can be used to connect two or more Layer 2 interfaces together to form a single broadcast domain. Bridging forwards packets in software, based on the Layer 2 header. This is similar forwarding logic to Layer 2 switching, which forwards packets in hardware.
What is EoIP tunnel MikroTik?
Ethernet over IP (EoIP) Tunneling is a MikroTik RouterOS protocol based on GRE RFC 1701 that creates an Ethernet tunnel between two routers on top of an IP connection. The EoIP tunnel may run over IPIP tunnel, PPTP tunnel, or any other connection capable of transporting IP.
What is a VPLS circuit?
Virtual Private LAN Service (VPLS) is a way to provide Ethernet-based multipoint to multipoint communication over IP or MPLS networks. It allows geographically dispersed sites to share an Ethernet broadcast domain by connecting sites through pseudowires.
How do VLANs communicate with each other?
A device called a router handles requests for devices to communicate when not belonging to the same VLAN. This function is called interVLAN routing. The router will have programmed an IP (Internet protocol) address on each of it’s connected VLAN networks.
What is the method used to filter traffic being bridged within a VLAN?
VLAN ACLs (VACLs) can provide access control for all packets that are bridged within a VLAN or that are routed into or out of a VLAN for VACL capture.