What is a Canon ink absorber?
Canon printers feature a waste ink absorber that can cause errors if full. Canon printers feature an ink absorber pad that soaks up excess ink from the print cartridges, preventing smears and keeping the cartridge free of dried ink.
Where is the ink absorber on a Canon Pixma printer?
Locate the waste ink absorbers in their black rubber frame. They will likely be on the right side of your printer, and will be located underneath the area where the ink cartridges rest when the printer is in standby mode.
How to reset the waste ink absorber on a Canon printer?
Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on. How to solve the full waste ink pad error message on Canon printers. – Make sure the printer is turned off. – Press and hold the Resume button (triangle inside a circle). – Whilst it is held down, hold down the Power button.
How do I fix ink absorber full error on my printer?
Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.
How long does it take to reset the waste ink sensor?
Waste ink counter – At bottom case/output To reset the waste ink None. 1 min. resetting tray unit (bottom case counter. (EEPROM settings) unit) replacement – At ink absorber replacement Media sensor – At logic board ass’y To correct the media Calibration media 2 min. correction*1 replacement sensor.
How do I reset the counter absorber on my printer?
Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber). 7. Turn off the printer and then turn it on again Was this answer helpful? On my MG2550 cleaned the absorber sponge and everything like it had to be done.