Is Virex II 256 safe on skin?

Is Virex II 256 safe on skin?

CAUSES SEVERE SKIN BURNS AND SERIOUS EYE DAMAGE. HARMFUL IF SWALLOWED. Causes burns/ serious damage to mouth, throat and stomach. Avoid contact with eyes, skin and clothing.

Is Virex safe on skin?

DANGER: CORROSIVE. Causes irreversible eye damage and skin burns. Do not get in eyes, on skin or on clothing. Wear chemical splash-proof goggles or face shield, rubber gloves and protective clothing.

Does Virex contain alcohol?

Although this product has a flash point below 200 Deg. F, it is an aqueous solution containing an alcohol and does not sustain combustion. Call a poison control center or doctor immediately for treatment advice.

How do you dilute a Virex 2 256?

To Prepare Use Solution: Add the product at 1/2 oz. per gallon of water (1:256). For Use as a One-Step Cleaner/Disinfectant: Pre-clean heavily soiled areas. Apply Use Solution to hard, non-porous environmental surfaces.

What surfaces can Virex be used on?

It is designed for use on (Use daily on) (the following) (hard, non-porous environmental surfaces): vinyl, painted surfaces, plastic (surfaces), glazed ceramic, glazed porcelain, chrome, stainless steel, aluminum, laminated surfaces and baked enamel surfaces associated with floors, walls, ceilings, tables, chairs.

How long does Virex last on surfaces?

Bactericidal Stability of Use-Dilution – When diluted, it should remain effective against Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella enterica for up to 1 year in storage as long as it remains sealed.

What is the dwell time for Virex 256?

10 minutes
All surfaces must remain wet for 10 minutes. Scrub and rinse surfaces thoroughly and let air dry. Apply use solution to hard, non-porous environmental surfaces and allow surfaces to remain wet for 10 minutes. Wipe and let air dry.

Can you mix Virex with bleach?

Use only with adequate ventilation. Remove and wash contaminated clothing and footwear before re-use. Mix only with water. DO NOT MIX WITH BLEACH OR ANY OTHER PRODUCT OR CHEMICAL.

What PPE is required when handling Virex II 256?

No personal protective equipment required under normal use conditions. Skin and body protection: No personal protective equipment required under normal use conditions. Respiratory protection: No personal protective equipment required under normal use conditions.

What are the ingredients in Virex?

Chemical Composition/Ingredients

Didecyl dimethyl ammonium chloride 007173-51-5 5.0-10.0
Tetrasodium EDTA 000064-02-8 1.0-5.0
Lauramine oxide 001643-20-5 0.5-1.5
Lauramine oxide 001643-20-5 0.5-1.5
Sodium sesquicarbonate 000533-96-0 0.5-1.5

Does Virex need to be diluted?

Cleaning Procedures: Blood and body fluids must be thoroughly cleaned from surfaces and objects before application of VIREX® II 256. Contact Time: At a 1:256 dilution, allow surface to remain wet for 1 minute to kill HIV-1 and for 10 minutes to kill all other organisms cited on the label.

How long does Virex 256 last?

1 year
Bactericidal Stability of Use-Dilution – Tests show VIREX®II 256 disinfectant cleaner, when diluted in 400 ppm hard water, remains effective against Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella enterica for up to 1 year in storage as long as it remains sealed.

How long does Virex last in a bottle?

Bactericidal Stability of Use-Dilution – Tests show VIREX®II 256 disinfectant cleaner, when diluted in 400 ppm hard water, remains effective against Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella enterica for up to 1 year in storage as long as it remains sealed.

Can Virex be used on food surfaces?

All food contact surfaces such as appliances and kitchen countertops must be rinsed with potable water. Do not use on glassware, utensils or dishes. Apply use solution to hard, non-porous surfaces.