What precautions must be taken when operating a portable belt sander?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear a dust respirator for dusty operations. Make sure the sander is switched “OFF” before connecting the power supply. Disconnect power supply before changing a sanding belt, making adjustments, or emptying dust collector.
What are the safety rules for a belt sander?
Safety Rules Don’t wear loose clothing or gloves, keep long hair tied back. Never remove guards unless authorized by WRL Manager. Don’t place hands or fingers under pieces during feeding to avoid potential pinch hazard. Don’t let hands come too close to top of opening on sander.
Which of the below are safe operating instruction during the use of a portable sander select the best answer?
Wear safety glasses with side shields or safety goggles, or a face shield (with safety glasses or goggles) when operating a sander.
When using power tools one should be aware of the actions of others in the work area?
When using power tools, one should be aware of the actions of others in the work area. As a general rule, the use of a blade with more teeth results in a smoother cut. Which best describes the variable-speed-trigger feature? Sawdust in between the teeth of the blade can keep the blade from working effectively.
How should the belt sander be placed when setting it down after sanding?
6. When finished sanding lift the belt sander off the material and then release the Off/On switch. 7. Lay the belt sander on its side when setting the tool down.
Why do you need to follow the safety precautions and procedure while using the portable electric drill?
Today, the portable power drill’s widespread use also carries with it the risk of electric shock, puncture wounds, cuts, contusions from spinning/moving parts, strains from torque power, hair and clothing entanglement, contaminant inhalation, burns from hot drill bits, and eye injuries.
What should you do before using power tools and while using it?
What should you do before using powered hand tools? Ensure that you have been properly trained to use the tool safely. Read the operator’s manual before using the tool and operate the tool according to the manufacturer’s instructions. Use only tested and approved tools.
What is the best way to sand a deck?
Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards. You may need to use a sanding sponge on the railings or balustrades. Use 60- or 80- grit sandpaper on the main deck boards, and use 80- or 100-grit on the handrails.
What are the safety precautions associated with portable tools?
Wear close-fitting work clothing to avoid entanglement and sturdy work boots with a non-slip sole. Use personal protective equipment such as: goggles/face shields to protect your eyes from flying particles and dust. ear muffs to protect your ears from noise damage.
What are some safe work practices and procedures you need to implement when using power tools?
Keep your hands and feet away from moving parts, keep others a safe distance away, and wear the correct personal protective equipment for the job. Finally, employers and experienced workers need to ensure new and young workers receive the correct training and supervision.
How to use a belt sander?
However, using a belt sander is a pretty simple operation. Here are the necessary steps to follow to properly use a belt sander. Prepare your wood to be sanded by ensuring it is properly secured on the table or workbench.
Should you wear goggles when using a belt sander?
If your belt sander contains a collection bag to collect the sawdust, goggles are not typically necessary. Belt sanders can kick up a lot of sawdust, which can easily fly into your eyes. This could lead to instinctively dropping the sander, which could cause injury. [3]
How do I know what size sanding belt to buy?
The size should be in the directions. Having the proper size sanding belt keeps the belt from moving so much. Some belt sanders have a small screw to adjust the tension (the screw’s may be Phillips head, flat head, or possibly an Allen wrench).
What happens if you don’t wear eye protection when using a Sander?
With its high-power motor, the sander can literally shoot chunks of wood into the air. Without the appropriate impact-resistant eyewear, this could result in serious eye injury or even vision loss. Problems such as these are easily avoided, however, by equipping yourself with the right PPE, including eyewear.