What is the Cunningham on a laser?
The Laser cunningham (or downhaul) is located at the front of the mainsail, and is simply a small diameter rope that is run from an eyelet in the mainsail, with a few loops or purchases, down to the deck, then to a cleat.
How old is my Laser 2000?
How old is my laser sailing dinghy?
| Year | Hull / Sail Number |
|---|---|
| 2000 | 168875 – 171536 |
| 2001 | 171537 – 173950 |
| 2002 | 173950 – 176694 |
| 2003 | 176695 – 179554 |
Can you reef a Laser 2000?
You are now ready to launch your Laser 2000. REEFING THE MAINSAIL 31 Thread the cunningham line through the three eyelets in the luff of the mainsail, and re-faşten in the slot under the gooseneck. If it is windy, and you feel that you will be overpowered in the Laser 2000, it is wise to reef the mainsail.
What does the Cunningham do?
The Cunningham is an adjustment used to tension the luff of the mainsail to move the draft forward, offsetting the wind’s efforts to push the draft aft. Most mainsails come standard with a Cunningham cringle on the luff above the tack.
What do Laser sail numbers mean?
Note: The first 2 numbers on all laser sails are red, the last 4 numbers are black. Spread the sail out on a clean, dry and flat surface with the starboard side (right side facing forward) facing up.
Can you reef a laser sail?
Foil reefing is only possible on dinghies with unstayed masts (that is, no shrouds or forestay or aftstay to hold up the mast), which will usually only have a mainsail. This method of reefing is popular on lasers and toppers.
What does increasing the cunningham do?
It is used to increase luff tension by pulling the luff down which changes the draft of the sail, bringing it forward or aft.
Can you put a motor on a Laser sailboat?
The Laser Bahia comfort is a very versatile boat, you can sail it, row it, you can even put an outboard engine on it.
What is the purpose of a cunningham?
A Cunningham is an adjustment line used to increase the performance of the mainsail by changing its shape. Basically, it is a rope that acts as a downhaul, which is often connected to a cringle in the luff of the mainsail between the tack and first reef point.
What is the purpose of a cunningham on a sailboat?
The cunningham controls the fore and aft position of draft in the mainsail or genoa and works together with the traveler, mainsheet, outhaul and vang to optimize sail shape and increase boatspeed. Cunningham controls lead to the crew to encourage adjustment as wind speed changes.
How long is a Laser 2000?
4.4m
SPECIFICATION
| 2000 | |
|---|---|
| Length | 4.4m (14’6″) |
| Beam | 1.8m (5’9″) |
| Hull Weight | 124kg (273lbs) |
| Sailing Weight | 200kg (441lbs) |
Why do sails have numbers?
Usually, the number is essentially “how many sails of this model have been produced before this one”. So, the first boat will have sail number 1, the 1000th will have sail 1000. Not all boats will come with numbered sails.
How to trim on a laser Cunningham?
Laser Cunningham – How to Trim. On a Laser, you have only a few trim lines you can adjust during sailing. You can change the shape, and therefore the power, in your sail with the sheet, vang, outhaul, and Cunningham. Each option will change the draft (shape/ depth) of your sail, and therefore the power your sail will generate.
How many hatches are on a laser 2000?
Sailing Number Positioning Th e Laser 2000 rigging instructions are a guide to rigging your boat. LaserPerformance reserves the right to make design and/or specifi cation changes to any of their products as part of their continuous development program. Important information Th ere are three hatches and one transom drain bung on the Laser 2000.
What are the Laser 2000 rigging instructions?
Th e Laser 2000 rigging instructions are a guide to rigging your boat. LaserPerformance reserves the right to make design and/or specifi cation changes to any of their products as part of their continuous development program.
Why choose Laser 2000?
We offer quality fibre optic equipment with quick delivery times. Laser 2000 delights in helping our customers achieve their goals through the application of photonics. Our highly skilled staff and partners are hungry to learn, but more importantly eager to share the knowledge accumulated by working with customers in many markets.