How do I reset my Mitel 5220 IP Phone?

How do I reset my Mitel 5220 IP Phone?

To Restore Factory Default Settings: Press *NO *until *TOOLS & FEATURES *appears and then press *YES*. 3. Press NO until *RESTORE DEFAULTS? *appears and then press *YES*.

How do I connect my Mitel VOIP phone?

Using 400 Series IP Phones

1. Press the Assign soft key to display the Assign user screen.
2. Enter your extension or full 10-digit phone number.
3. Press the Next soft key.
4. Enter your phone/voicemail PIN.
5. Press the OK soft key.
6. The phone displays your name and extension.

How do you clean a Mitel phone?

To clear the current configuration, do the following:

1. Press the Mute button (microphone with a slash through it)
2. Use the phone’s keypad to dial 25327 (CLEAR) and press the # key.
3. If the phone does not automatically reboot, press the Clear soft key.
4. The phone reboots and the “Assign user” screen appears on the phone.

How do I unlock my Mitel 5320e phone?

Press the Phone Lock feature key or enter the Phone Unlock Feature Access code. Enter your user PIN to unlock the set.

How do you turn off a Mitel phone?

3300 Shutdown Procedures

1. Log into the PBX.
2. Enter System Administration.
3. Go to Maintenance Commands.
4. Enter “shutdown” System responds with: System shutdown in progress… .. the system can be powered down safely after 60 seconds.
5. Wait 90 seconds before pulling the power plug or turning of power on power supply.

How do you pin a Mitel phone?

Plug the phone into its socket. Let the phone boot up and you’ll eventually see a message saying either: Use Super Key to send PIN. Use Hold Key to send PIN.

How do you mute a clear Mitel phone?

Is Mitel a PBX system?

BENEFITS OF SMALL BUSINESS IP PHONE SYSTEMS FROM MITEL Also known as hosted PBX or small business hosted VoIP, our innovative cloud platform allows you to communicate easier and collaborate smarter.

How do I connect my Mitel phone to WIFI?

1. Power connector.
2. Press and hold the push switch for 10 sec while the Mitel WLAN Adapter is active.
3. Release the switch when the WLAN LED turns from Green to Red.
4. Connect the network cable.
5. ON (Red): Powered on and ready.
6. ON (Green): Running in Infrastructure mode.
7. ON (Green): A network connection is established.

How do you use the speaker on a Mitel phone?

Tap the button on the speakerphone to answer an incoming call directly while it is ringing. To put a current call on hold and answer an incoming call, tap the button on the speakerphone. To switch between held call and an active call, tap the button on the speakerphone.