What does KDAT lumber mean?
Kiln Dried After Treatment
KDAT stands for Kiln Dried After Treatment. KDAT lumber has ALL the same weather-beating durability as traditional treated wood, but with the added bonus of being kiln dried.
How wide is a pressure treated 4×4?
Pressure-Treated Premium Post (Common: 4 in. x 4 in. x 8 ft.; Actual: 3.56 in. x 3.56 in.
Who makes KDAT lumber?
Northern Crossarm
Located in Chippewa Falls, Wisconsin, Northern Crossarm is the largest producer of KDAT Wood. In business since 1922, Northern Crossarm is a third-generation family company with 35 employees. Their flagship product, KDAT Wood coated in a rich brown finish, is available at over 300 locations East of the Rocky Mountains.
What are the true dimensions of a 4×4?
And it’s not just a 2×4: A 1×4 is actually ¾ inches by 3-½ inches; a 4×4 is actually 3-½ inches by 3-½ inches. Most of us that know about this dimensional discrepancy will say “This is how it has always been.”
What is the actual size of 4×4 lumber?
3 ½ x 3 ½
While it is true that the actual size of a 4 x 4 board is 3 ½ x 3 ½, that is not a deceptive practice in my opinion. It is well known that lumber is sold based on nominal sizes, and the actual size of the boards is smaller than the nominal size.
Can you paint KDAT lumber?
BENEFITS OF USING CULPEPER KDAT LUMBER: Ready to paint, stain or seal immediately. Dried to original moisture content. Increased strength and stiffness. Lighter weight than freshly treated lumber.
Is kiln dried wood better than pressure treated wood?
Kiln-dried wood is crackproof but pressure-treated wood is not guaranteed against warping, shrinkage, or splitting. Pressure-treated wood can dry in about 1 month, whereas fresh wood provides an environment where fungi and bacteria produce rot and insects infest.
What is the width and height of 4×4?
The equivalents of a 4 x 4 cm size photo are: 40 x 40 milimetres photo (i.e. photo’s width 40 mm and height 40 milimetres) 1,57 x 1,57 inches photo (i.e. photo’s width 1,57 inches and height 1,57 inches)
Are 4×4 really 4 inches?
While it is true that the actual size of a 4 x 4 board is 3 ½ x 3 ½, that is not a deceptive practice in my opinion. It is well known that lumber is sold based on nominal sizes, and the actual size of the boards is smaller than the nominal size.
Is kiln dried lumber safe for gardens?
Wood is one of the most common material for use in raised beds. Untreated pine or spruce (whether heat-treated or kiln-dried) are good, inexpensive options. Unlike pressure-treated lumber, untreated or heat-treated wood contains no questionable chemical compounds that may leach into the soil within the bed.
Can you use kiln dried wood for decks?
Kiln Dried After Treatment (KDAT) lumber is recommended as a preferred, stable structure for frames, joists and everything that goes below a deck. Yet, 90%+ of all decks are still built with wet/green treated lumber.
Will kiln dried wood crack?
Furniture made from kiln-dried wood comes with the following benefits: It is lightweight. So, moving furniture is easy. Kiln-drying prevents the wood from warping or developing small cracks over time, resulting in extremely durable furniture.
What is the true measurement of a 4×4?
What is the nominal size of a 4×4?
Nominal vs. Actual Measurements of Dimension Lumber
| Nominal Size | Actual Size |
|---|---|
| 2 x 10 | 1 1/2 x 9 1/4 inches (38 x 235 mm) |
| 2 x 12 | 1 1/2 x 11 1/4 inches (38 x 286 mm) |
| 4 x 4 | 3 1/2 x 3 1/2 inches (89 x 89 mm) |
| 4 x 6 | 3 1/2 x 5 1/2 inches (89 x 140 mm) |
Is kiln dried better than pressure-treated?
Is kiln dried better than pressure treated?
Can I use kiln dried lumber outside?
If outside, the wood may still expand and contract with the seasons, but since it was installed at a stable moisture level that expansion and contraction will have a very minimal effect. A great example of when to use kiln dried wood, besides the obvious framing lumber, is when you are installing a cedar deck.
What are the measurements of a 4×4?
What is KDAT decking?
High-quality lumber sure to impress. YellaWood Select ® brand KDAT products are a high-grade product, featuring wood chosen for a beautiful appearance. It provides the luxurious appeal of a composite deck while maintaining a completely natural look. All at a fraction of the price.
Why choose KDAT® lumber?
The wow factor comes standard. High-quality lumber sure to impress. YellaWood Select ® brand KDAT products are a high-grade product, featuring wood chosen for a beautiful appearance. It provides the luxurious appeal of a composite deck while maintaining a completely natural look.
How do you install KDAT?
KDAT Installation Tips Following pressure treatment, KDAT products are placed in a large oven, or kiln, where excess moisture is removed and the wood is returned to its original moisture content.
Why choose YellaWood KDAT?
Wood that is KDAT, or Kiln Dried After Treatment, provides many advantages. YellaWood ® brand KDAT materials give you the installation characteristics of composite with the natural beauty and character of real wood.