How do I fix my Motorola modem?
Locate the RESET button on the back of your modem. Press the RESET button and hold it for 30 seconds before you release. After 30 seconds has passed, release the RESET button. This will clear all configuration in the product and pull a fresh connection from your Internet Service Provider.
How do I activate my Motorola cable modem?
Connect the Motorola power cube between the Motorola cable modem and a live power jack. DO NOT use your old cable modem’s power cube on your Motorola cable modem. If your cable modem’s Power Button is not already pressed in, press the button in to turn on your cable modem.
How do I access my Motorola SURFboard settings?
To access your surfboard cable modem open your web browser and use the IP address of 192.168. 100.1. The default page that will open is the Status page. The information on this page gives a snapshot of a series of events that the modem goes through when establishing a connection to your cable ISP.
What lights on modem should be on?
What do the lights on my modem mean?
- LAN: A blinking green light is normal.
- INTERNET: The internet light should never be on.
- ADSL: A solid green light indicates a good Internet connection.
- POWER: A solid green light indicates the unit is properly connected to power.
- Related Topics.
Why is cable modem not working?
Power cycle your cable modem – Turn off your modem for at least 10 seconds, then turn it back on again. Restart your computer or router – Restart your computer or router that is connected to your cable modem. This ensures that they receive a correct IP address from the cable modem.
How do I setup my Motorola SBG6580?
Installing SBG6580
- Verify that the coaxial cable is connected to the cable outlet.
- Connect the other end of the coaxial cable to the Cable connector on the modem.
- Plug the power cord into the power connector on the SBG6580.
- Plug the power cord into the electrical outlet.
How do I reset my SBG6580?
Factory Reset Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it. Hold down the Reset switch for 5 -10 seconds and release it. NOTE: To assure the gateway factory defaults, hold the reset switch for 5 -10 seconds. The indicators are that all LEDs turn off.
How do I setup my Motorola Surfboard SBG6580?
How many lights should be on my Wi-Fi router?
Most routers operate on two wireless frequency signals, 2.4 GHz and 5 GHz. The 2.4 GHz light will tell you if the router is currently providing a wireless network on this frequency that you can connect to.