Can you put any curtains on a traverse rod?

Can you put any curtains on a traverse rod?

Ideally, no since traverse rods only work for pinch pleat curtains. Regular curtains will not evenly hang in a traverse rod. But with a few sewing and pinch-pleating, you can turn regular curtains into pinch pleat curtains.

How do you measure a traverse rod for curtains?

Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.

Which is the best curtain rod?

Best curtain rod overall: Decopolitan End Cap Single Curtain Rod Set. Best curtain rod for renters: RoomDividersNow Tension Rod. Best curtain rod for traverse draw heavy drapes: Rod Desyne Heavy Duty Adjustable Traverse Rod. Best curtain rod for blackout curtains: Umbra Twilight Room Darkening Curtain Rod.

Do I need a traverse rod?

If you want your curtains and drapery to be functional rather than just for decoration, traverse rods are a great option because they prevent the wear and tear that would normally occur when manually drawing your curtains open and closed.

How do you convert Tab back curtains to traverse rods?

If you want to use a traverse rod, that opens and closes with the pull of a cord, you need to alter your tab-back panels to accept a drapery pin. Just by making a small single-finger pleat, the curtains can accept a pin and hold the folds in place as the curtains are opened and closed on a traverse rod.

How much wider Should a curtain rod be than the window?

Additionally, be sure to choose a curtain rod that’s wider than your window. This allows curtains to be pulled completely to the side of the window and makes the space feel larger. The rod itself should be 8 to 12 inches longer than the window’s width, which allows for 4 to 6 inches on either side.

Should all your curtain rods match?

While your curtain rods don’t need to be the same, they should at least coordinate if they’re in adjoining rooms. Or, if the spaces are separate enough to allow for different treatments, you can switch it up.

How thick should my curtain rod be?

Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.

How do you hang non pleated drapes on a traverse rod?

1. Step 1: Look for Heading Tape.
2. Step 2: Measure the Space.
3. Step 3: Mark for Pin Placement.
4. Step 4: Stitch Pin Pockets.
5. Step 5: Add the Drapery Pins.
6. Step 6: Hang the Drapes.

Can I use rod pocket curtains on a traverse rod?

Although the traverse rod system was made for pinch pleat curtains, you can adapt almost any rod pocket curtain to work on the rods.

How do I repair a traverse curtain rod?

Ladder

How to fix traverse rods?

Keep a drill bit from sliding by covering the drilling area with a piece of masking tape.

How to restring a traverse rod?

Measuring tape

How do you center a traverse rod?

Measure across the face of the curtain rod. Add the length of the curtains to this measurement and multiply this amount by two.