What wheels have a 114.3 bolt pattern?
5×114.3, also known as 5×4.5 is a very common bolt pattern used on many Honda, Nissan, Infiniti, Lexus, Toyota, Hyundai, Ford, and more. 5×114.3 wheels are available in 14″, 15″, 16″, 17″, 18″, 19″ and 20″ diameters in a wide range of widths and offsets to fit just about any car, SUV or light truck on the road.
What does 114.3 bolt pattern mean?
The 5×114. 3 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (114.3), the notional circle determined by the center position of the studs. The 5×114.3 bolt pattern is common to Acura, Alpine, Aston Martin, BAIC, BYD, Baojun and Changan vehicles.
Can bolt pattern 5×114 3 fit 5×114?
Yes they will fit fine.
Is 5×5 5 the same as 5×114?
5×5. 5 is called standard bolt pattern. 5×114. 3 is called non-standard bolt pattern.
Is 4.5 inch the same as 114.3 mm?
The same is true if you are measuring in millimeters. The charts below show common bolt patterns in inches and their metric equivalent….Five Lug Wheels.
| Inches | Metric |
|---|---|
| 5 x 4.33 in | 5 x 110mm |
| 5 x 4.41 in. | 5 x 112mm |
| 5 x 4.50 in. | 5 x 114.3mm |
| 5 x 4.52 in. | 5 x 115mm |
What vehicles have bolt pattern 5×114 3?
The most popular cars with PCD 5×114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.
What size is a 5 lug bolt pattern?
A bolt circle of 5 x 4.5 would indicate a 5 lug bolt pattern on a circle with a diameter of 4.5 inches. There are four important measurements that are used to categorize and identify a wheel for fitment purposes. Rim Diameter The actual diameter of the wheel at the point where the tire bead seats ( NOT the outer lip of the rim).
What wheels fit 5 x 115 bolt pattern?
The 5 X 115 bolt pattern is common to OLDSMOBILE, BUICK, PONTIAC, CADILLAC, CHEVROLET, DODGE, SATURN, CHRYSLER and SUZUKI vehicles. A full list of vehicle makes and models appears below. Note: Alloy wheels should always be installed using a torque wrench ensuring proper mount. Check your vehicle owner manual for proper specifications.
What is a bolt pattern on a wheel?
Key Identifying Wheel Dimensions: Wheel Bolt or Lug Pattern (or bolt circle, lug circle, lug pattern, etc.) is the measured diameter of an imaginary circle formed by the centers of the wheel lugs or bolt holes. Bolt patterns can be 3, 4, 5, 6, 7, 8 or 10 lug holes.
What size torque do I need for my Wheels?
Check your vehicle owner manual for proper specifications. General recommendations by stud size in Ft/Lbs: 12mm = 70-80, 7/16 = 55-65, 1/2 = 75-85, 14mm = 85-95, 9/16 = 95-115, 5/8 = 135-145 It is prudent to re-torque wheels after about 60 to 90 miles (100km to 150km) of driving.