How many fuel filters does a 2010 Dodge Cummins have?
2 fuel filters
There are 2 fuel filters on a Ram Diesel. One under the hood and one under the bed of the truck.
How often should you change your fuel filter on a Cummins?
For most Diesel trucks it is recommended that you replace your fuel filter every 10,000-25,000 miles depending on how you drive, how often you commute and what type of vehicle it is. Most cars will have information on how frequent you should change the fuel filter in the owner’s/maintenance manual.
How many fuel filters does a Ram 2500 diesel have?
two
NOTE: All 2019 to 2023 Dodge Ram 6.7L Cummins diesel trucks now contain two separate diesel fuel filters.
Does the 2010 Ram 1500 have a fuel filter?
A 2010 Does not have a servicable fuel filter, The strainer inside the fuel pump is the only thing that keeps debris out of the fuel system. You need to take it to the dealer and have a fuel system service done on it to clear out the injectors and throttle plate.
What size is the fuel filter cap on a 6.7 Cummins?
As the description reads, this nifty tool is a “2fer.” The curved end gives you extra leverage and clearance on the hard-to-reach engine mounted 28MM fuel filter cap. The straight end fits over the WIF sensor on the chassis-mounted fuel filter.
Does my truck have a fuel filter Dodge Ram 1500?
it is in the tank on the fuel pump. replace both as a unit.
Where can I buy a fuel filter for my Dodge Ram?
Buy Online. Pick Up In-Store. Buy Dodge Ram 2500 Fuel Filter online and get Free Next Day Delivery on qualified purchases, or pick up your parts at a nearby AutoZone today. I drive a lot of miles and when I drive I like to know I got the best for my truck.
How do I change the fuel filter?
Swap out the filters O-Ring and you’re good. You need a 1 n 1/8 socket. Everything worked out in the end with this filter. Cheaper of course to do it yourself and easy enough. Get a hose to extend your fuel drain hose or it will get everywhere. After you drain housing, when you remove the old filter more fuel will come out so be ready for that.
Can you over tighten the fuel filter housing?
Do not over tighten! The filter housing is marked “30 Nm” (newton meters) which converts to 22 foot pounds (meaning very lightly tightened because it’s a plastic housing with a rubber gasket, not a lug nut). I use a torque wrench.