How do I reset my concept 2 PM5 monitor?
Hold down the Units and Display buttons and use a paperclip to depress and release the “Reset” button in the back of the monitor. Continue holding the buttons down for at least 7 seconds or until the display flashes “Setting Factory Defaults” shows briefly. Then, release the buttons.
How do you calibrate a PM5?
To confirm the calibration or start a full calibration at any other time, press More Options > Utilities > Calibration Utilities. After moving the BikeErg to a different location, confirm the calibration to ensure accurate results.
How do I turn off PM5 monitor?
Re: new C2 model D – PM5 doesnt turn off after inactivity Is there a “12H” indicator on the Main Menu screen, right below Main Menu? If so you can turn it off by going to More Options; Utilities; Battery. Now press the Units key three times then press the Display key three times to toggle the 12 hour function.
Can you upgrade Concept 2 monitor?
Almost all Concept 2 rowing machines can be upgraded to a PM5 monitor with Bluetooth, which is what is required to connect to asensei. Older models of Concept2 rowing machines may have a PM3 or a PM4 rather than a bluetooth equipped PM5 and these can be upgraded.
How do I fix my pm2 monitor?
The monitor may need new batteries. Replace the batteries. The batteries may be installed upside down. Reverse the orientation of the batteries.
What should my damper setting be?
3-5
A damper setting of 3-5 is recommended because it provides a comfortable platform for the start and an effective “gearing” for most workouts. A damper setting of 3 is most appropriate for longer workouts. A damper setting of 5 is most appropriate for shorter workouts.
What setting should my Concept 2 be on?
Concept2 generally recommends a damper setting on the indoor rower between three and five. Damper Setting is not resistance. The damper controls the air flow into the flywheel. It affects the feel of the stroke, but does not directly determine the resistance—which is generated by the speed of the rotating flywheel.
How do I check my concept 2 meter?
Viewing Lifetime Meters (Odometer)
- On the Main Menu, select More Options.
- Select Utilities.
- (PM5 Only) Select More Utilities.
- Select Product ID.
- Select More information.
Why does my second monitor keep turning off?
One of the most common reasons is that your computer is running out of memory. If this is the case, it might be shutting down the monitor to free up a little more memory. This way, the computer can keep the CPU and hard drive running so the program you are using can do the work it needs to do.
How do you set drag factor on Concept 2 pm2?
To view drag factor on the PM:
- On the Main Menu, select More Options.
- Select Display Drag Factor.
- Begin rowing, skiing or riding. The PM will display the drag factor after a few seconds.
What’s the hardest level on a rowing machine?
A “10” setting allows the most airflow and therefore the highest resistance. A “1” permits little airflow and minimizes resistance. Beginner rowers should start in the 3-5 range.
Can I replace the PM2 with the PM5?
The PM2 is no longer available. If you are having issues with it and are not able to resolve them using troubleshooting, you can replace it with the PM5, available in our online shop. Please make sure you select the right machine when ordering, as retrofit instructions and components vary by machine.
How do I contact Concept2?
If you have questions or problems, or if you need further troubleshooting assistance, please contact us at 0115 9340140 (UK and Ireland) or [email protected].
How do I test my PM2?
Press the “Ready” and the “Display” button at the same time and the PM2 goes into a test sequence which is very usefull to see what segments of the LCD are not working. The “E011” is also a common problem and I know what it is also.
How do I reset the E011 button on my monitor?
The monitor now only displays E011. Hold down the four bottom buttons on the face of the monitor (recall, 2 set digits, ready). While holding these, press and release the ON/OFF button. You can release the four buttons now.