What are 5 safety rules for a drill press?
Drill Press Safety Rules
- Run drill at correct RPM for diameter of drill bit and material.
- Always hold work in a vise or clamp to the drill table.
- Use a correctly ground drill bit for the material being drilled.
- Use the proper cutting fluid for the material being drilled.
- Remove chips with a brush, never by hand.
What are the hazards of a drill press?
POTENTIAL HAZARDS AND INJURIES Hair/clothing getting caught in moving machine parts. Eye injuries. Flying swarf and chips. Sharp edges and burrs.
What are the PPE for drill press?
In terms of personal protective equipment (PPE), the only piece of equipment that’s absolutely necessary when operating a drill press is a pair of high-grade, shatter-proof goggles with side shields. Eye injuries are known to occur when metal shards or debris are shot from underneath the drill.
What is the most common cause of accidents on a drill press?
► One of the most common causes of accidents that occur on a drill press is poor operator judgment. Often the operator will attempt to hand-hold the stock while drilling. When the drill enters the work, it can catch and twist the stock from the operator, which results in an uncontrolled rotating piece of wood.
How do you guard a drill press?
Safeguard a Drill Press Chuck Placing a shield in front of the chuck is the most popular safeguarding choice. Many options are available such as magnetic goose-neck or clamp type shields on drill presses. The problem with this type of guards is that it’s super easy just to ignore them.
What safety precautions must be observed before using an electric drilling machine?
Wear safety glasses or a face shield (with safety glasses or goggles). Keep drill air vents clear to maintain adequate ventilation. Keep drill bits sharp always. Keep all cords clear of the cutting area during use.
Does a drill press need a guard?
This standard does apply to drill presses and lathes, and it is the Occupational Safety and Health Administration’s (OSHA) policy to require protection for employees by guarding methods such as barrier guards.
Does OSHA require a guard for a drill press?
What are the most important rules for safe operation of the drill press?
What are some things you should avoid doing?
- Do not wear any loose clothing or ties.
- Do not wear gloves, rings, watches, or bracelets while working with a drill press.
- Do not set speeds, adjust, or measure work until machine is completely stopped.
- Do not force the drill with extra pressure.
What are the safety rules for a drill press?
operational safety rules must be observed by everyone working on the KCWG Drill Press. Failure to follow the safety rules will result in a loss of shop privileges. Start with a Risk Assessment to ensure a safe work area: 1. A two foot perimeter around the drill press should be kept clear of people, debris and sawdust that impair traction or footing to avoid slips and falls. 2. Safety glasses with side shields or a face shield must be worn. Hearing protection should be
How do you use a drill press safely?
Read the manual properly. Before step into function the drill press,the user has to well-known about the machine by reading the manual of the machine.
How to use a drill press safely?
Use Perfect Drill Bits. Never use bits that are blunt,rusty or bent.
How to setup and use the drill press?
The drill should be unplugged while you are setting it up for use. Set the Speed. The speed on most drill presses is adjusted by moving the drive belt from one pulley to another.