How much weight can a Hullavator hold?
Wing-shaped profile with T-track. Lift-assist rack for kayaks handles up to 40 lbs of the weight so you can load and unload – even on your own.
How do you remove a Hullavator?
Removing a Hullavator isn’t too hard – in the up position (arms retracted on top of cross bars), unlock the swing-arm and tip it up (so it’s vertical but not extended/lowered) and pull it out (extend the swing arm) just an inch or two, then yank out the removable pin with your free hand.
How heavy is the Hullavator?
Thule Hullavator Pro Rooftop Kayak Carrier
| Color | Black/Silver |
|---|---|
| Material | Aluminum |
| Brand | Thule |
| Item Weight | 39.7 Pounds |
| Load Capacity | 75 Pounds |
Can you use 2 Hullavators?
There is not a general restriction from Thule that says two Hullavator Kayak Carriers # TH898 can’t be used on a Thule roof rack. As long as the crossbars on your Ford Escape have the required length for two sets and a sufficient weight capacity (if you have Thule, weight capacity isn’t an issue) it can be done.
Will the Hullavator fit on Yakima roof rack?
Expert Reply: The Hullavator Pro # TH898 will work just fine with Yakima round bars and will not require any additional hardware like what you mentioned.
How far apart should J racks be for kayak?
Most kayak carriers, like part # TH834 require at least 24 inches crossbar spread. I recommend making sure you have at least the 24 inches for a spread but I would probably place them about 28 inches apart.
How far apart should kayak J hooks be?
How much weight can the Thule 897xt hullavator lift?
The Thule 897XT Hullavator lifts up to 40lbs of the kayak’s weight. The Thule 897XT Hullavator features waist level, side-of-vehicle, versus overhead, loading/unloading for an easier, safer and less strenuous way to load and unload your kayak
What is a hullavator kayak roof rack mount carrier?
The Thule 897XT Hullavator Kayak Roof Rack Mount Carrier is a lift assist carrier that allows for easy side loading and unloading of all sorts of kayaks, including tandems, by a single person. Designed around a combination of retractable double arms that extend down the side of your vehicle from your roof rack and a built-in gas-assisted lifting…
Does the hullavator really work?
The Hullavator does indeed work; loading my boat without it on the van would be impossible. It also has a certain cool-factor; other kayakers frequently ask about it. But it does have drawbacks: Installing the Hullavator is an hours-long affair; once it is installed I leave it on all spring-summer and fall.