How do I contact Swann security cameras?
Contact Swann
- Swann Australia. Swann Communications Pty. Ltd.
- Swann United States. Swann Communications U.S.A. Inc. 12636 Clark Street,
- Swann Canada. Swann Communications Ltd. Phone: +1 905 237 1679.
- Swann Hong Kong. Swann Communications Ltd. 13D, Eton Building,
- Swann United Kingdom. Swann Communications Ltd.
How do you reset a Swann DVR?
Disconnect the camera from the NVR (or from a PoE switch or a power adapter) to turn it off completely. Press and hold the reset button. While holding down the reset button, plug the camera back to the NVR (or to the PoE switch or a power adapter) and continue holding down the reset for 30 seconds, then release.
How do I fix my Swann camera?
Reboot the camera by pressing the power button as if it is already on and wait about 5 seconds before pressing the power again. Reset the camera by pressing the reset button located on the back (use a pin to press it).
What model is my Swann DVR?
To find the model number of your Swann DVR or NVR, you can check for the sticker or label underneath the recorder. Each Swann recorder comes is labelled properly. The model number usually starts with SW (short for Swann) or SR followed by DVR or NVR then a ‘dash’ or ‘hyphen’ then some numbers.
Can I upgrade my Swann cameras?
Analog CCTV Cameras / 960H DVRs Our hybrid cameras work with Swann analog CCTV DVRs, and also with the latest HD surveillance DVRs. So, if you upgrade your DVR later, you can still use these cameras by switching them to HD video mode.
What causes video loss in Swann security cameras?
So why does video loss happen? In general, the issue of “video loss” on CCTV security cameras or DVR/NVR, in many cases, comes down to several factors: insufficient power supply, unstable network, wiring problems, hardware (cameras, NVR/DVR or monitor) failures, inefficient camera software and IP address conflicts.
What is the super password for Swann?
The default, all-access username is “admin”, the default password is “12345”.