Is Cel-Fi legal in Australia?
Cel-Fi – The Legal Repeater Cel-Fi is the only consumer mobile phone repeater that has been widely approved by all mobile carriers in Australia. Currently approved for use on the Telstra, Optus and Vodafone mobile networks, Cel-Fi is a new type of mobile enhancement device called a Smart Repeater.
How far does Cel-Fi GO work?
Maximize Cel-Fi Coverage The Cel-Fi repeater system is very unique in the way it maximizes the indoor coverage. The WU and CU units can be up to approximately 30m apart, the further apart they are the better indoor coverage area will generally be.
How many devices can use Cel-Fi?
Cel-Fi GO will provide a coverage area sufficient for multiple simultaneous users, between 5 and 20 depending on the activity. The 4G/LTE bands can only be utilised for data if both the smart phone and the local network support Voice Over LTE (VoLTE).
How can I improve my Cel-Fi signal quality?
Maximising your Cel-Fi GO Setup
- physical distance between server & donor antennas.
- using shielding (such as metal obstructions) between donor & server antennas.
- directional antennas to push signal away or hide signal from donor.
Are 4G boosters legal in Australia?
In Australia mobile phone boosters are banned devices and not allowed to be operated on any mobile network. The government authority for radio communications the ACMA, have prohibited the users from operating or possessing a mobile phone booster. It is also illegal to sell or supply boosters.
Does Cel-Fi GO boost internet?
Cel-Fi GO is a mobile repeater station for your vehicle. It works by receiving the network signal, amplifying it and then re-transmitting it within the vicinity of your vehicle. Your phone obtains the boosted signal from the GO to improve voice and internet connectivity.
Does Cel-Fi work with Optus?
Cel-Fi GO is compatible with all leading phone networks in Australia, including Telstra, Optus and Vodafone.
Does Cel-Fi boost WIFI?
Yes, and for a good reason! Cel-Fi is controlled by and operates as an extension of an operator’s network. This is what allows Cel-Fi (by regulatory authority) to boost signals about 1000x more than other solutions, and therefore cover very large areas even if the original network signal is weak.
How do you tell if Cel-Fi GO is working?
If your Cel-Fi GO has a solid Status Indicator light in either yellow or green, the system is fully functional. If your system has a solid (non-red) status light but your phone is not picking up a stronger cellular signal you might need to check the Service Antenna.
How can I boost my mobile signal at home Australia?
Here are 5 top tips – and some bonus ones – to make sure you are improving your phone’s reception:
- Buy a signal booster. Mobile phone signal boosters are perfect for improving the amount and distance of your reception.
- Antennas.
- Speak to your provider.
- Remove Your Phone Case.
- Hand Position.
Can you buy mobile signal booster?
You can buy boosters from numerous online stores and installation doesn’t have to be difficult, either. However, it’s important to pick the right sort of booster, as there are several different types.
Will Cel-Fi GO work with 5G?
5G support is available for Cel-Fi QUATRA 1000/2000/4000, GO G32, and SOLO products that have applied the 5G Cel- Fi WAVE software update.
Does Optus sell signal boosters?
A booster is all that you need to enhance your signal and from our wide range of boosters that amplify the Optus signal, you would not miss a booster specifically suited to solve your problem. Contact our customer care today to get any assistance you need or clarification.
Does the Telstra go repeater work with Optus?
Nationwide Network Compatibility Cel-Fi GO is compatible with all leading phone networks in Australia, including Telstra, Optus and Vodafone.
Why is my Cel-Fi GO not working?
You could have a power adapter failure, a hardware failure, or the system could need a simple restart. Make sure that you power source is a functional outlet. Test something else, that you know works in the same outlet, or try moving the Cel-Fi GO to another outlet that you have confirmed has working power.
What is celfi RS-2?
Details Nextivity’s second generation CelFi RS-2 is a cost- effective and intelligent Indoor Coverage Solution for WCDMA/HSPA+, designed to dramatically increase indoor voice quality and data throughput for 3G consumers while significantly improving network capacity for Mobile Operators, Small Businesses and MVNOs.
What mobile networks does Cel-Fi work with?
The Cel-Fi systems will support 3G (UMTS/WCDMA), 4G (HSPA & HPSA+), and LTE technology of operators that have approved the use of Cel-Fi on their network. You can reach out to your operator for more information on what specific technology they use.
What is Cel-Fi and is it safe?
Cel-Fi products are self-configuring, carrier-approved, and unconditionally network safe; leveraging the IntelliBoost chipset to deliver the industry’s highest gain at the lowest cost per square foot. Cel-Fi is authorized by 200 carriers.
Why does my Cel-Fi Pro keep restarting after changing power supplies?
If, after switching power supplies both system are functioning properly then your Cel-Fi PRO system simply needed a restart. This is not something that should continue, but if it occurs frequently please reach out to your point of sale for support.