How do you make a strap in SolidWorks?

How do you make a strap in SolidWorks?

To create a belt/chain assembly feature:

1. Click Belt/Chain (Assembly toolbar) or Insert > Assembly Feature > Belt/Chain.
2. Specify the PropertyManager options.
3. Click . In the FeatureManager design tree, the following appear: A Belt feature. The belt length appears next to the feature.

How do you delete edges in SolidWorks?

To hide or show edges in a drawing:

1. Click Hide/Show Edges.
2. Select the edges to hide (you can select edges individually, or use box selection), then click .
3. To show edges, click Hide/Show Edges.
4. Select the hidden edges highlighted in orange, (you can select edges individually, or use box selection), then click .

How do you make a flexible wire in SolidWorks?

To create a flexible ribbon cable route:

1. Insert the first ribbon cable connector into the assembly.
2. Insert the second ribbon cable connector, and, optionally, ribbon cable clips.
3. In the Auto Route PropertyManager, under Routing Mode, select Auto-Route.
4. Under Auto Route, select Flexible.
5. Define the path of the cable:

How do I add a sweep in SolidWorks?

To create a sweep: Sketch a closed, non-intersecting profile on a plane or a face….Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

What is swept in SolidWorks?

SWEEP is the one feature in Solidworks that helps sweep a closed profile along a closed or open path. In this session, we are going to use a simple 3D object as an exercise to demonstrate the use of the SWEEP command in Solidworks.

How do I remove lines from surface in SolidWorks?

Select an edge or parting line in the graphics area to add or remove it from Edges. . Select a name to identify the edge with a callout in the graphics area. Right-click and select Clear Selections to clear all selections from Edges.

How do you add a routing in Solidworks?

Enabling the Routing Add-In

1. From the SOLIDWORKS menu bar, click Tools > Add-Ins .
2. From the Add-Ins dialog box, under SOLIDWORKS Premium Add-ins: To use Routing in your current SOLIDWORKS session, select Routing under Active Add-ins. To use Routing in every SOLIDWORKS session, select Routing under Start Up.
3. Click OK.

Where is sweep in SolidWorks?

Swept Cut on the Features toolbar or Insert > Cut > Sweep. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

How do I use the sweep tool in Solidworks?

Select a sketch in the graphics area for Profile . Select a sketch in the graphics area for Path ….Click one of the following:

1. Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
2. Swept Cut on the Features toolbar or Insert > Cut > Sweep.
3. Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

How do you make a movable part in Solidworks?

Using the PropertyManager to Move a Component Click Move Component (Assembly toolbar) or Tools > Component > Move. The Move Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.