How much is a plumbing snake worth?
A handheld or drill-activated plumbing snake costs $15 to $100 and reaches up to 25 feet for minor clogs near the sink basin or toilet. A machine-powered plumbing snake costs $250 to $1,000 on average and reaches 50 to 75 feet for most residential blockages.
What are plumbing snakes called?
A plumber’s snake or drain snake is a slender, flexible auger used to dislodge clogs in plumbing. The plumber’s snake is often reserved for difficult clogs that cannot be loosened with a plunger. It is also sometimes called a toilet jack.
Are there different types of drain snakes?
Drain snakes come in several different types, ranging from simple handheld models to powerful motorized augers. The reason for the variety is that there are different types of drains: sink drains, toilet drains, house drains, sewer drains, etc.
How do you get a plumbing snake around a bend?
If you suspect the snake is getting stuck in a corner, try operating the crank in reverse. This makes the head wobble back and forth, but because you’re cranking counterclockwise, it can’t collect any debris. If the bend in the pipe is really at fault, the wobbling of the head should help the snake clear the corner.
What kind of augers do plumbers use?
Cobra Products 30500 Cobra 30000 Pipe Auger The ample length and rugged makeup of this quality auger is a solid choice for plumbers, building superintendents, and other pros.
How do you snake an outside drain?
In order to snake a drain from outside, start with the right tool – a long manual or powered drain auger. Feed the head of the snake and connected cable through the cleanout drain, located outside in the yard until you reach the drain (taking corners into account if applicable).
Can a plumber snake break a pipe?
Drain Snakes Can Damage Pipes While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes. Old pipes in many homes are galvanized, or coated in zinc, which was done to prevent the pipe from rusting or corroding.
How do you snake past a 90 degree turn?
The proper way to use a snake is to insert the head into the drain and push very slowly without cranking. If you try to force it, it can bend back on itself and actually come out of the drain. Push gently and slowly, and if the auger is the right one for the job, it should slide smoothly through the pipe.
What are the parts of a plumbing snake?
Cable Ends and Attachments Like a woodworking drill, some plumbing snakes include detachable ends and specialized attachments that can accomplish jobs that ordinary heads alone cannot complete. These specialized ends and attachments are generally used to accommodate unique piping architecture or unique clog construction.
How to unblock a plumbing snake?
Move the head of the plumbing snake up, down, left and right. This will loosen the blockage and you will feel it break up or move. Make sure you don’t get the head stuck in the pipe, and if you hear any scraping, then stop immediately.If you can’t feel the blockage moving, you should try retracting the device, and the blockage may come with it.
Why do you need a plumbing snake for hair removal?
With a plumbing snake, you won’t have a need for toxic substances. These electric drain augers make it a lot simpler to solve the problem at its source. Plus, after you pull that fist-sized ball of hair out of your pipes, your family will think you’re some sort of DIY hero.
How much does a plumbing snake cost?
A cheap domestic plumbing snake can cost you $50, but for a professional model, it can be upwards of $500. Where can I buy or rent plumbing snakes?