What size is toilet water line connection?
Typically they are 3/8” in diameter, but toilet supply line size can vary in length, usually anywhere from 9” to 20”. Measure for accuracy to ensure you are buying a part that will match your installation.
What is the supply line for a toilet?
These supply lines carry water from a nearby cold water source to the tank of your toilet. If you look closely at the bottom of your tank, you should see a short line, usually chrome or white, that runs from the tank into the wall – this is the supply line.
Is 3 inch pipe OK for toilet?
The standard size for a toilet drain pipe is 3 inches in diameter, but drains up to 4 inches in diameter are sometimes used. Typically, 3-inch pipes carry the water to the toilet, but a 4-inch pipe may be used to move wastewater out of a house to a sewer or septic tank.
What connector do you need to attach the water line to the tank of a toilet?
Connect the shut-off valve to the toilet with a standard toilet supply hose that has a 3/8-inch compression fitting on one end and a 1/2 FPT fitting to fit the tank inlet on the other. If your toilet is in a basement or another cold, damp place, water condensation on the tank can drip onto the floor and saturate it.
How is a toilet connected to the floor?
The toilet flange, also known as a closet flange, is the part of the toilet that secures the unit to the floor and connects to the drain pipe. Usually made of PVC, rubber or metal, this piece is circular in shape and usually secured in place with a few bolts.
What is the minimum size pipe for a toilet?
3 inches
Regardless of your plumbing code, the minimum drain size for a toilet is 3 inches. Water closet’s flushing 1.6 gallons (or less) are rated at 3 DFUs (drainage fixture units).
What size PVC do I need for toilet?
three-inch
A three-inch pipe is what’s used in homes to pipe toilets. The four-inch pipe is used as the building drain under floors or in crawlspaces to transport all the wastewater from a home out to the septic tank or sewer. The four-inch pipe may also be used in a home if it’s capturing two or more bathrooms.
Can I use 2 pipe for toilet?
Unless two toilets are on the same drain and then it must be a 4-inch plumbing waste pipe, the toilet requires a drain pipe of 3 inches in diameter. Unless there is a toilet discharging into the piping, systems with less than nine units can use a 2-inch pipe.
Which pipe is best for toilet?
PVC Pipes Polyvinyl chloride pipes (PVC) are commonly used as part of a sink, toilet, or shower drain line. Its plastic tubing is ideal for this kind of usage because it protects the water from rust and corrosion better than other types of pipes. This capability also makes PVC pipe incredibly durable.