How do I reset my Cisco IP Phone 7940?

How do I reset my Cisco IP Phone 7940?

This article goes over how to do a factory reset on the Cisco 7940 and 7960 IP phones….Resolution/Steps

1. Unplug Ethernet & power cable (if applicable) from the back of the phone.
2. Press and hold the # (Pound/Hashtag) key and plug the Ethernet & power cable back in.
3. Press in order 123456789*0# to begin the reset sequence.

How do I change my Cisco VOIP phone name?

Change Caller ID Name for Cisco Phone

1. Navigate to Name Change (Caller ID) form in Pinnacle.
2. Fill out the form. Ensure that the Customer Phone and Phone Number of Request fields have the correct information.
3. Enter the name requested in the New Name Display (Called ID) field.
4. Click Submit.

How can I remotely access my phone?

When you (or your customer) run the SOS app on the Android device it will display a session code that you will enter on your screen to remotely view that device. Users with devices running Android 8 or higher will be prompted to turn on accessibility in Android to allow remote access.

How do I forward my Cisco phone to my cell phone remotely?

Using your office phone:

1. Press the “Forward All” softkey.
2. Then enter the call forward target phone number exactly as you would dial it from your phone.
3. To verify that your calls are forwarded, look for the “Forward All” icon in the line label, and the forwarding information in the header.

How do I reset my Cisco voicemail PIN remotely?

KNOWN ISSUE: Do not access this through Settings in your Web Inbox; please use link below.

1. Log in to the Cisco Personal Communications Assistant (PCA) Messaging Assistant: https://nsas-pucxn-01.doit.wisc.edu/ciscopca/home.do.
2. Select Messaging Assistant.
3. Select Passwords/Change PIN.
4. Enter New PIN.
5. Confirm New PIN.

How to reset a 7941/7961 VoIP phone to factory default?

How to Reset a Cisco 7941/7961 VoIP Phone to Factory Default. This article will show you the steps needed to: Unplug the power cable from the phone, and then plug in the cable again. The phone will begin its power up cycle. Immediately press and hold # and once the Headset, Mute, and Speaker buttons begin to flash in sequence, release the # button.

How to reset Samsung Galaxy 7970/7971 to factory settings?

After you press these keys, the line buttons on the phone flash red and the phone goes through the factory reset process. Do not power down the phone until it completes the factory reset process and the main screen appears. The next procedure is for setting the 7970/7971 to Factory Default, the information is taken form this link:-

How do I Reset my Phone to factory settings?

Unplug the power cable from the phone, and then plug in the cable again. The phone will begin its power up cycle. Immediately press and hold # and once the Headset, Mute, and Speaker buttons begin to flash in sequence, release the # button.

What happens when I perform a factory reset of the IP phone?

When you perform a factory reset of the Cisco IP Phone, the following information is erased or reset to its default value: term61.default.loads file or term41.default.loads file) Before you perform a factory reset, ensure that the following conditions are met: •The phone must be on DHCP-enabled network.