How do I cancel my Motorola Hubble subscription?
Support > Support Go to https://app.hubbleconnected.com/ and log in. Your Plan is listed and behind it the ‘Unsubscribe’ button. Click on ‘Unsubscribe’. Select ‘Yes, I’m sure’ to confirm the cancellation your Hubble Membership Plan.
Why wont my Hubble connect?
Make sure 2.4GHz is enabled on your router. The Hubble camera can only be connected to the 2.4 GHz band on Wi-Fi routers. All Wi-Fi routers have a 2.4 GHz band. Newer routers are often dual-band router, with 2.4 GHz and 5 GHz bands, in which case you need to ensure to enable the 2.4GHz band is enabled on your router.
How do I connect my Hubble to my Motorola camera?
Press and hold the ‘Pair’ button on the camera for 3 seconds until the Hubble camera tells you ‘ready for pairing’. The Hubble for Motorola Monitors app will search for a camera. When your Hubble camera is listed, select that camera. The Hubble for Motorola Monitors app will now connect to your Hubble camera.
Why is my Motorola baby monitor not working?
Reset the units by disconnecting them from the electrical power and use a pin to press the reset key until you either hear a beep, or the monitor turns off. Wait about 15 minutes before plugging the units back in. Allow up to one minute for the camera and the parent unit to synchronize.
Can I cancel my Hubble subscription online?
Go to https://app.hubbleconnected.com/ and log in. Your Plan is listed and behind it the ‘Unsubscribe’ button. Click on ‘Unsubscribe’. Select ‘Yes, I’m sure’ to confirm the cancellation your Hubble Membership Plan.
Is Hubble easy to cancel?
Editor’s Note, updated 4/6/18: After getting so many comments about Hubble’s cancellation policy, we reached out to them on Twitter and this is what they shared: Our cancellation process is very easy, our customers can cancel their subscription by calling us at 1-844-334-1640 between the hours of 9AM and 5PM EST Monday …
How do I reset my Hubble?
How can I reset my Hubble camera?
- Hold down the ‘Pair’ button.
- Turn the Hubble camera off while holding down the ‘Pair’ button.
- Now turn Hubble camera back on, while still holding down the ‘Pair’ button and wait until you hear a beep and the LED starts blinking (blue/red or green depending on the camera model).
How do I connect my Hubble to Wi-Fi?
Navigate to the Wi-Fi® settings where you can see your Hubble camera listed as if it were another Wi-Fi® network. If your Hubble camera doesn’t show up, press and hold the ‘Pair’ Button on the camera again for 3 seconds. Select your Hubble camera from the list and connect to it.
Why is my Hubble camera offline?
Your Hubble camera periodically lets the server know it is online. When the server does not receive such signal for a certain period of time, it will assume that your Hubble camera is offline and this will show in the status in the Hubble for Motorola Monitors app.
How do I reset my Hubble baby monitor?
Hold down the ‘Pair’ button. Unplug the camera while holding down the ‘Pair’ button. After 10 seconds plug the camera back in, while still holding down the ‘Pair’ button. After 20 seconds release the ‘Pair’ button and wait until the LED starts blinking.
Is Hubble contacts easy to cancel?
You can cancel your Hubble contacts account at any time with no cancellation fee. Hubble contact subscriptions are continuous and will automatically renew unless you choose to cancel your account. Your Hubble account will remain active util the end of the paid billing period.
Can you return Hubble contacts?
You may return your Hubble contacts for a full refund for any reason within 14 days after notifying us of the cancellation, as long as the outer shipping box is unopened.
Can you cancel Hubble online?
Cancel Hubble Contacts via email Send an email to [email protected]. State that you want to cancel your subscription. Give your name, billing detail, and other relevant info to confirm it is you. Ask for a confirmation email.
How do I get my Hubble camera back online?
* Delete the camera again from the camera list (if listed only). * Then start the hard reset of the camera holding down the ‘Pair’ button. * Turn the camera off while holding down the ‘Pair’ button. * After 10 seconds turn the camera back on, while still holding down the’ Pair’ button and wait until you hear a beep.