What is the function of diffuser in compressor?
The diffuser is an important element of a compressor or pump. Its purpose is to reduce the velocity of the flow leaving the impeller resulting in an increase in pressure. The diffuser can be simply depicted as a nonrotating channel whose flow area increases in the direction of flow (Figure 7.7).
What are the different diffusers used in centrifugal compressor?
The diffuser converts a portion of the remaining kinetic energy in the gas stream (velocity pressure) into static pressure (potential energy), further reducing the volumetric flow. Centrifugal compressor diffusers fall in two broad categories: vaneless and vaned.
What happens in the diffuser of the centrifugal compressor?
The next component, downstream of the impeller within a simple centrifugal compressor may the diffuser. The diffuser converts the flow’s kinetic energy (high velocity) into increased potential energy (static pressure) by gradually slowing (diffusing) the gas velocity.
What is diffuser in turbocharger?
The turbocharger diffuser is in the compressor side of the supercharger. The diffuser is mounted in the compressor side of the turbocharger in order to direct the air smoothly into volute casing and Convert kinetic energy to pressure energy inlet air.
What is VGD in chiller?
An improved variable geometry diffuser (VGD) mechanism for use with a centrifugal compressor. This VGD mechanism extends substantially completely into the diffuser gap so that the VGD mechanism may be used more fully to control other operational functions.
What is the function of diffuser in engine?
Diffuser is one key component of the gas turbine combustor following the compressor. Its primary function is to slow down the air flow delivered by the compressor in order to promote efficient combustion and avoid large total pressure losses.
What is inducer and diffuser in turbocharger?
The inducer in the turbocharger is the smaller part of the compressor wheel that sucks ambient filtered air parallel with the driven shaft compresses it and pushes it out the perpendicular bore of the inducer horn.
What is the chiller safety?
A vital safety feature in industrial chillers is the flow safety thermostat. These devices detect adverse changes in temperature within the refrigerant circuit. When unfavorable thermal conditions arise within the chiller’s refrigeration unit, the flow safety sensor will detect it and cut off the coolant circulation.
How does diffuser increase pressure?
In diffusers the velocity of a flow slows and the pressure generally increases. Nozzles do the opposite.
What is the function of diffuser in turbocharger?
The diffuser section in a centrifugal flow turbojet engine reduces the velocity of the air as it leaves the compressor and increases its pressure.
What is K clearance in turbocharger?
Measuring of distance between the rotor shaft end and the flange of bearing cover by blower side is known as K value in Turbocharger. Purpose. In case of thrust bearing worn out, to ensure that rotating impeller does not to touch the stationary blower casing cover.
What is plenum pressure in compressor?
The fluid is then slowed down in a volume called the plenum, where the kinetic energy is converted into potential energy in form of a pressure rise. When the plenum pressure behind the compressor is higher than the compressor outlet pressure, the fluid tends to reverse or even flow back in the compressor.