Table of Contents
How do you sand and refinish an old chair?
- Clean. Any refinishing furniture DIY starts with basic cleaning.
- Examine. Take an overall assessment of the piece and determine if it needs any repairs.
- Remove the Old Finish.
- Sanding.
- Chemical Stripper.
- Seal the Wood.
- Stain or Paint.
- Apply Finish.
How do you smooth a wooden chair?
If there are any small scratches or dents in the chair, sanding may eliminate them; if not, fill scratches, dents, and dings with a small amount of wood putty or filler, using the putty knife. Let the putty dry, then sand it smooth.
Should I strip or sand stained furniture?
So then I point out that stripping is faster, and in the case of paint could even be safer than sanding. It’s almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover.
Do you have to sand wood before painting?
But the key to a smooth paint job starts before your wood sees even a drop of paint. It starts with a well-prepared surface and knowing how to properly sand wood before painting it. A good sanding will ensure your paint comes out silky-smooth and help the paint adhere to the surface for a sturdier paint job.
What kind of sandpaper do you use to refinish furniture?
The grades of sandpaper used most for furniture finishing fall in the fine and very fine categories – that is from 120 grit through 220 grit; with 320, 400 and 600 grit used for special purposes. For “hard to stain” woods, finish sanding with 120 grit will usually accommodate the problem.
Can you sand wood stain off?
Sand out the stain To sand wood previously stained you must start by using medium-grit sandpaper followed by a progression of increasingly finer sandpaper grits. This should remove most of the color left by an old stain. If you’re applying a new stain, it should mask any residual color.
Why do people strip wood before sanding?
Stripping a finish is faster than sanding to remove it. This is one I come across often. People tell me in one way or another, that they are going to sand off the finish or paint. So then I point out that stripping is faster, and in the case of paint could even be safer than sanding.
How do you sandpaper wood furniture?
To remove the last bits of finish, use a palm sander with medium-grit sandpaper (about 150-grit) until you see the bare wood. Then switch to fine sandpaper (200+ grit) until the entire piece is uniform. To remove those last bits of finish, palm sand with medium sandpaper (150 grit) until you see the bare wood.
How can I paint a wooden chair without sanding?
Milk paint, which you can purchase as a powder or premixed, or even whip it up yourself at home, is a nontoxic and biodegradable paint option that’s great for use on wood furniture—and if you mix it with an equal part of bonding agent, you don’t need to sand the piece before beginning.