Table of Contents
How do I reset my Moultrie camera?
Perform a hard reset on your camera.
- Remove the batteries and the SD card from the camera.
- With the batteries and SD card removed, turn on the camera on for one minute (either use On, Quick Start or Custom Start modes).
- After one minute is up, turn the camera back off, insert the batteries and the SD card.
How do I setup my Moultrie?
Sign up for a free Moultrie Mobile account, or sign in to your existing account. Open your Moultrie Mobile App, select Account, then select Activate Device. Scan the barcode located on the inside of your trail camera. If activating online, manually enter your camera’s Serial# and ID#.
How do I check the battery on my Moultrie camera?
Slide the power switch to the ON position. The battery level will appear on the LCD Display for 2 seconds. Use the Up/Down buttons to choose between 5 different modes: 1 Photo/Low Resolution, 1 Photo/High Resolution, 3 Photos/Low Resolution, 3 Photos/High Resolution and Video.
Why is my Moultrie trail camera not working?
Check the Batteries Most battery-powered trail cameras will last over time, but sometimes the batteries fail for several reasons. Luckily, this issue is a quick fix as long as you have fresh batteries on hand. Make sure you’re using the proper kind of batteries and install them correctly.
How long do trail cam batteries last?
The average life of a trail camera battery is approximately 30,000 photos. However, there are many variables that can affect a batteries life span, such as ratio of night to day photos, video modes, inclement weather and the batteries that you are using.
Can I use rechargeable batteries in my trail camera?
The batteries should be standard alkaline or lithium batteries. We do not recommend using rechargeable batteries as they have less capacity and lower voltage. Rechargeable batteries will not operate your trail camera reliably or at its full potential.
Why does my Moultrie camera Say no signal?
LOW BATTERY If the signal was weak to start with, then low batteries can make it even worse. Pro Tip: If your batteries are getting low then it is best to replace them. Lithium batteries work better than alkaline batteries in the cold weather and will typically last longer in general.
Why am I not getting pictures from my Moultrie camera?
If you check your trail camera only to find it hasn’t been taking photos, double-check your current settings. Sometimes you simply forget to start it up — make sure the camera is on. Then review your settings to confirm your device is set to take photographs when it detects motion, or put it in time-lapse mode.
How do I activate Moultrie Mobile?
Go to moultriemobile.com and login with your email address and password. Click My Account in the top right corner of the page. Click Activate Device and follow the instructions to pick your plan. Once you’ve selected your data plan, you’re ready to get connected and start viewing photos.
How long does it take to format SD card on Moultrie camera?
The SD Card light turns solid green once formatted successfully. If the SD Card light turns solid red, repeat the process or try a different SD Card. If successful the connection sequence will begin with all four lights coming on. Allow roughly 60 seconds for the connection sequence to complete.
What batteries are recommended for Moultrie cameras?
Our AA alkaline batteries work in the entire line of Moultrie game cameras. Depending on the model, a fresh set of batteries can provide 14,000 to 28,000 images before needing replacement. Game cameras have various quantity requirements.