Table of Contents
How do I reset my Waterfurnace?
To reset the unit, repeatedly push the SYSTEM button on the thermostat until the display reads OFF. The unit lockout indicator light will remain on for up to 15 seconds after turning the system off. After the unit lockout indicator light goes out, turn the system back on to the desired MODE.
Can thermostat cause furnace not work?
One of the most common furnace problems is a malfunctioning thermostat. A sure sign your thermostat isn’t working properly is if your fan is constantly running. This will cause your thermostat battery to run, and cause your furnace to work inefficiently.
Do you need a special thermostat for geothermal system?
If you have a specialized heating system (like geothermal), speak to your installer about whether a smart thermostat will really benefit you. You will almost certainly be better off using a geothermal specific thermostat, even if that means that you can’t ‘turn the heating up’ on a phone app.
How do you adjust a geothermal thermostat?
It makes sense that when they aren’t in the home, there is no need to keep the temperature at the perfect 70°F so in the winter, they set it back to 60°F….Geothermal And Thermostats: Set It and Forget It!
| Setting | Time | Set Point Temp (Heat) |
|---|---|---|
| Wake | 6:00 am | <70°F |
| Day | 8:00 am | Setback at least 8°F |
| Evening | 6:00 pm | <70°F |
| Sleep | 10:00 pm | Setback at least 8°F |
What does the red light mean on my thermostat?
If you notice a red light coming from your thermostat during regular operation, this usually means that the outdoor unit shut itself off due to a problem and is locked out from normal operation. When this happens, the outdoor unit sends a signal to the thermostat to let you know there is a problem with the unit.
How do you know if you got a bad thermostat?
HVAC system won’t turn on: The most obvious sign of a bad thermostat is that the HVAC system in your building won’t turn on or respond to the thermostat. You should be able to turn on your heating or cooling system from the thermostat, or change operation back and forth from heating to cooling.
How do I know what kind of thermostat I need?
4 Simple Steps To Choosing The Right Thermostat For Your Home
- Step 1: Figure Out Which Thermostat Is Compatible With Your Heating And Air System Type.
- Step 2: Learn About (And Choose) Your Thermostat Type.
- Step 3: Choose Your Programming Options.
- Step 4: Install Your Thermostat.
- Looking For More Help?
How do I know if my geothermal heat pump is working?
Here are some common indicators that something’s wrong with your geothermal heat pump system:
- High electric bills.
- Not enough air flow.
- Not enough heat in winter or cooling in summer.
- Rooms suddenly aren’t heating or cooling evenly.
- Visible water leaks from system components.
- Weird smells or noises coming from the equipment.
What does it mean when heat on is flashing on thermostat?
“Cool On” or “Heat On” is Blinking Then, make sure it’s calling for the right unit to start. This is typically shown by “cool on,” “heat on” or a picture. If this set of words or the illustration is blinking, your thermostat is in a five-minute delay state. This feature stops your equipment from damaging short cycling.
Why is my geothermal not cooling?
If your geothermal is not cooling your home, it may have dirty air filters. Dirty filters lower the efficiency of your HVAC system. They allow in dirt, dust and other biological contaminants that restrict proper airflow in your house.
Why is my geothermal heat blowing cold air?
If your geothermal HVAC system is blowing cold air on a frigid day, the emergency heating system may have an electrical problem, such as a malfunctioning capacitor.
What kind of thermostats does Waterfurnace offer?
WaterFurnace offers a wide range of thermostat options including communicating and programmable thermostats for the most temperature control possible. Almost all WaterFurnace thermostats support programmable schedules. All support 3 heating and 2 cooling stages and auto-changeover.
Do the Waterfurnace thermostats support programmable schedules?
Almost all WaterFurnace thermostats support programmable schedules. All support 3 heating and 2 cooling stages and auto-changeover. Please consult the thermostat feature chart for a complete summary of all features by model, or the Thermostat Brochure for complete details.
How many heat stages are in a programmable thermostat?
This thermostat is made for use with single or dual stage units that feature an ECM blower motor. It features 3 heat stages and 2 cool stages and dual fuel capabilities. With a sleek touch–screen display this programmable thermostat will look great in any home.
What kind of thermostat do I need for a blower motor?
This powerful thermostat is great for any system—single or dual stage units with ECM or PSC blower motors. Dual fuel capability, text based output and Comfort Talk are some of the features that make this thermostat a versatile and dependable choice. Model Number – TP32U03