Table of Contents
How do you use flashlube valve saver fluid?
Instructions. Flashlube Valve Saver Fluid should be added right before or after refueling. To ensure that the mixing ratio is optimal, the ratio holds 50 ml for 50 litres of fuel.
What does Valve saver do?
Flashlube Valve Saver Fluid is an Upper cylinder lubricant and cleaner formulated to minimise Valve Seat Recession (VSR) in LPG & CNG Vehicles. This proven formula also contains a combination of additives that cleans fuel injectors & fuel systems, increases fuel economy and reduces emissions.
How do you use Flash Lube?
Locate a suitable position in the dash board for the Low level warning light. Drill a 7mm diameter hole and insert the LED. Place the Flashlube sticker over the LED, ensuring the surface is clean and dry for maximum adhesion.
What is valve lubrication?
Valve lubricants can either be synthetic or organic and their main role is to reduce surface-to-surface friction in the moving parts of the valve. Without a lubricant, the surfaces will wear out very fast.
Where is flashlube made?
Australia
All Flashlube products are made in Australia to the Highest Standards employing the latest technology to bring you quality products designed to exceed your expectations. Flashlube Moly Grease is a Highly Effective grease delivering excellent anti wear features for use industrial and automotive industries.
Does flashlube diesel conditioner work?
Extensively tested both in the laboratory and in the field, Flashlube Diesel Conditioner delivers impressive results in engine performance, fuel economy & emission reductions. There are clear & measurable advantages of incorporating Flashlube Diesel Conditioner into diesel fuel.
How often should I oil my valves?
Oil the valves frequently. You do not need to oil the valves each time you play, but it is important to oil them 2-3 times each week or whenever the valves are not moving as efficiently as possible.
Do valves need oil?
The proper lubricant for engine valves is the oil used to lubricate the engine, typically a multi-weighted engine oil. By engine design, the oil is moved under pressure from the crankcase by the oil pump, through ports and galleys at the top of the head, an area just inside the valve cover.
What is the best diesel conditioner in Australia?
CRD Fuel Enhancer is Australia’s number 1 diesel injector cleaner. It’s the go-to additive when you need to get results. Cleans and maintains dirty fuel injectors.
What is a good lubricant for diesel fuel?
Diesel Extreme is the best additive in the game. This one adds seven points to diesel’s cetane score (which again improves the fuel’s combustion performance), and it cleans and lubricates injectors and other critical fuel system components.
What can you use instead of valve oil?
Hair clipper oil and valve oil are both very thin mineral oils, and you can substitute the two in either direction. You can apply your hair clipper oil to the valves on your trumpet to lubricate them.
What is flashlube Catch can Pro?
Flashlube Catch Can Pro is a premium oil fume filter that protects the engine by filtering out damaging oil mist and condensation from the air entering the inlet passage. This oil mist and condensation often causes carbon build up resulting in loss of power, fuel economy and can consequently lead to expensive engine damage.
Are flashlube products made in Australia?
All Flashlube products are made in Australia to the Highest Standards employing the latest technology to bring you quality products designed to exceed your expectations. Flashlube Catch Can Pro is a premium oil fume filter that protects the engine by filtering out damaging oil mist and condensation from the air entering the inlet passage.
Why choose flashlube diesel filter?
This oil mist and condensation often causes carbon build up resulting in loss of power, fuel economy and can consequently lead to expensive engine damage. Flashlube Diesel Filter is a modular diesel fuel filter/water separator system. It features a complete range of modules and components to meet any diesel filtration need.