How do I add a scan destination in Ricoh?

How do I add a scan destination in Ricoh?

Registering Scan Destinations

1. Start the Web browser, and access the machine by entering its IP address.
2. Click [One Touch Button] or [Scan Destination].
3. From the [Add New Type] list, select [E-mail], [FTP] or [Folder].
4. Register information as necessary.
5. Enter the administrator password if required.
6. Click [Submit].

How do you set up a SMB Scan?

SMB Protocol

1. Right click on the folder as 1b and select Properties. Select the Sharing tab and click Share.
2. Enter the username (created in step1a) and click Add.
3. Make sure the user has Read/Write access and click Share.
4. The folder is now shared. Click Done.

How do I change the default scan on my Ricoh printer?

Changing the Default Functions of the Scanner’s Initial Display

1. Make the necessary scan settings on the initial screen.
2. Press the [Program] key.
3. Press [Program as Defaults].
4. Press [Program]. A confirmation screen appears.
5. Press [Yes].

How do you scan on a copy machine?

How To Scan Using A Copy Machine

1. 1: Load your document.
2. 2: Press the ‘SCAN AND SEND’ button.
3. 3: Specify the recipient of the scanned document.
4. 4: Choose your desired scan settings.
5. 5: Scan and send the document.
6. 6: Remove document after scanning.

Where does my printer save scans?

The default save location for scans is normally in the Scanned Document subfolder of the Documents folder. (If you want to change that manually, you can simply move the entire Documents folder to a new location.)

How do I find the SMB path?

Locating the SMB folder manually

1. Press [Change] under “Path”.
2. Enter the path where the folder is located. For example: if the name of the destination computer is “User”, and the folder name is “Share”, the path will be \\User\Share.
3. Press [OK]. If the format of the entered path is not correct, a message appears.

How to send scanned files by scan to folder?

Preparation for Sending by Scan to Folder To send scanned files by Scan to Folder, you must first perform the following: Check the machine is properly connected to the network Configure the network settings in [System Settings] Configure the necessary settings in [Scanner Features]

How do I configure the scanner to scan a network?

The Scanner Features screen appears. Press the [General Settings], [Scan Settings], [Send Settings], or [Initial Settings]tabs and configure the relevant settings on those tabs. If necessary, configure the shared folders, FTP server, and Netware server on the network in advance.

How do I configure the scanner features in PressPress?

Press [Scanner Features]. The Scanner Features screen appears. Press the [General Settings], [Scan Settings], [Send Settings], or [Initial Settings]tabs and configure the relevant settings on those tabs. If necessary, configure the shared folders, FTP server, and Netware server on the network in advance.

How to combine multiple scans into a single file?

Combining the Data of Multiple Scans into a Single File Scanning an Original and Dividing the Scanned Data into Multiple Files Pressing an OK Stamp on Pages of the Scanned Original Specifying the Destination of Send to Folder Using the Scan to Folder Helper App Scanning Special Originals