Table of Contents
Is GXP compatible with BB86?
SRAM’s GXP cranks are well suited to BSA and BB86 bottom brackets, hence the company has hardware to suit.
Is SRAM GXP compatible with Shimano?
No go, GXP is 24/22 vs 24 for shimano.. Shimano bearings are 24mm dia.
Is GXP compatible with dub?
Before you shake your head and scream at the sky at the prospect of another BB standard, SRAM DUB will fit anywhere existing GXP and BB30 cranks go. DUB will fit your frame.
Is dub compatible with GXP?
What diameter is SRAM GXP?
Specifications
| BB-frame interface | English/BSA (MTB/Road: 68/73mm), English/BSA (MTB: 83mm), English/BSA 100mm, English/BSA 68/73mm, English/BSA 68mm, English/BSA 73mm, English/BSA 83mm, Italian (70mm) |
|---|---|
| Bearing type | Standard |
| Spindle diameter | 24mm |
| Cup material | Aluminum |
| Weight (g) | 108 |
Will GXP fit BB30?
A GXP bottom bracket will not work on a BB30 frame or any incompatible parts. “GXP” stands for “Giga X Pipe,” while “BB30” is short for “Bottom Bracket.” The “30” indicates the 30-millimeter diameter of the bottom bracket and spindle.
Is GXP same as BB30?
Is GXP compatible with BB30?
What is a GxP bottom bracket?
This is their GXP Road Pressfit bottom bracket system. This is comprised of two sets of steel bearings, each in a nylon cup with a lip. You press each set into a side of a BB86 (road) bottom bracket shell.
What is the difference between a BB86 and a BB92 frame?
The BB86 bottom bracket shell is 86.5mm wide and the BB92 shell is 91.5mm wide. Both have an inside diameter of 41mm. Originally designed to use 24mm or 22/24mm diameter crank spindles, some frames can run 29mm and 30mm diameter crank spindles with direct-fit bearings.
What size crank spindles do I need for a BB86?
BB86/92 Technical Info The BB86 bottom bracket shell is 86.5mm wide and the BB92 shell is 91.5mm wide. Both have an inside diameter of 41mm. Originally designed to use 24mm or 22/24mm diameter crank spindles, some frames can run 29mm and 30mm diameter crank spindles with direct-fit bearings.
How do you use the SRAM GXP road pressfit bottom bracket?
You press each set into a side of a BB86 (road) bottom bracket shell. Then, you take any SRAM 24mm through-axle crankset and boom (!) you just got your non-standard bottom bracket to work with a whole bunch of Truvativ cranksets. The SRAM GXP Road PressFit bottom bracket works with pressfit specific bikes only, like the Scott Addict R1 and CR1 SL.