What is Fatek PLC?

What is Fatek PLC?

FATEK Automation Corporation FATEK Automation Corp. was established in 1992 in Taiwan by a group of engineers engaged in PLC design and development for many years. Since its establishment, FATEK has strived for R&D in order to provide high-quality, high-function and user-friendly automatic control products.

How do I download Winproladder software?

PLC Fatek and all PLCs use a Software to Program and Create the program to execute in automation, to download winproladder follow next steps:

1. Go to website fatek in link down and Register.
2. Fill all information.
3. Activate link in email and then back to Fatek webpage.
4. Download Einproladder Fatek V3.

Which software is used for Fatek PLC?

Winproladder_Main Unit Software
Winproladder_Main Unit Software and Manual_PLC_Support | FATEK AUTOMATION CORP.

What is WinProLadder?

WinProLadder is an ideal PLC programming Software for beginners. If you don’t have a PLC it really doesn’t matter because in WinProLadder we have the simulation option. So you can write a ladder logic program and run the simulation to check your programming.

How do I download and upload a PLC program?

1. Directly connect your PC to the controller using a mini B USB cable.
2. Click the PLC tab on the program ribbon, and then click Communication.
3. Select USB; the network Discovery utility will begin to search for UniStream devices.
4. Click the desired device to establish communications.

How does ladder logic work?

Ladder logic works in a similar way to relay logic, but without all the laborious relay control wiring. In simple terms, the field input and output devices are wired directly to the PLC and the ladder logic program decides what outputs to activate, depending on the status of the input signals.

Can we copy program from PLC?

If you have a memory card, you can transfer the program to the memory card. Once on the memory card, you can copy that to your PG/PC for backup purposes. Then insert the memory card into the down plc.

How do I upload a PLC program to my computer?

Click the PLC tab on the program ribbon, click Download or Upload, and then select the desired option.

How do I upload a program to a PLC?

Upload Siemens PLC

1. Download your program first to PLC.
2. To upload the program, I have to create a new project.
3. Now as shown in the below figure select “project3” (in our example, you may change your project title) then go to the “online” option then select “upload device as the new station”.