What is a good brace height on a bow?
These guidelines work for most recurve bows, but always follow the manufacturer’s recommended brace-height range. 62- and 64-inch bows have 7½- to 8½- inch brace heights. 66- and 68-inch bows have 8- to 9-inch brace heights. 70- and 72-inch bows have 8¾- to 9½-inch brace heights.
Does brace height affect speed?
The brace height of a bow will affect two significant areas, the first being speed. In general, a bow with a shorter brace height will shoot much faster. This is because the distance between the string and grip is smaller, meaning the arrow stays on the string longer.
Why is a longer brace height more forgiving?
Longer brace height Bows with longer brace heights are going to be more forgiving. This is because the arrow is coming off of the string sooner rather than later, meaning that the shooter has less time to influence the shot. These are also usually a bit slower in terms of fps.
Does brace height really matter?
A short brace height offers the benefit of higher arrow velocity. This is because the bowstring is being drawn farther in order to reach the user’s draw length since, at rest, the bowstring is closer to the bow grip.
Does brace height affect nock point?
Changing brace height does not change nocking point. The nock is still in the same place, only the limb tips are moving forward or back because the string is becoming shorter or longer.
How does draw weight affect arrow speed?
Draw weight is a measurement of the force required to draw a bow. Bows with higher draw weights generate faster arrow speeds by transferring more energy to the arrow. The result is a flatter trajectory, deeper penetration, and greater likelihood of pass-through shots when bowhunting.
What makes a bow more forgiving?
A longer brace height (BH) makes a bow more forgiving of shooter error. BH is the greatest distance between the bow’s grip and the string.
What bow did Fred Bear use?
1965/66 Kodiak white glass… in 1966 Fred took his Polar Bear with this bow.
What causes arrow Porpoising?
The porpoising, in our experience, has always been due to an incorrect nocking point position (typically too low), this leads to the arrow leaving the string “nock low” and the nock or, more likely, the vanes of the arrow clipping the rest or the arrow shelf on its way out, giving you large up and down oscillations.
How high should a longbow brace be?
For longbows that are 50 to 60 inches in length, the brace height will be 7 to 8 inches. For bows over 60 inches, the brace height will usually be 8 inches and longer. This, of course, can vary from bow to bow.
What is the average height of a hunting bow?
In general, 62 and 64-inch bows will have a 7 ½ to 8 ½ inch brace height. 66 to 68-inch bows will be 8 to 9 inches of brace height, and 70 to 72-inch bows will be 8 ½ to 9 ½ inches. Again, these are general numbers and will vary from manufacturer to manufacturer.
Does brace height affect bow shooting speed?
In general, a bow with a shorter brace height will shoot much faster. This is because the distance between the string and grip is smaller, meaning the arrow stays on the string longer. The longer the arrow is on the string, the more time it has to build up speed.
How is brace height measured?
Measuring brace height is done with a tool called a T-square or bow square. A T-square is similar to a ruler and is used to set your nock point, measure tiller, and brace height among others. So how does brace height affect your shooting? The brace height of a bow will affect two significant areas, the first being speed.