How much weight can a 1/2 beam clamp hold?
1/2″ C-Clamp Style Beam Clamp
| Style | C-Clamp with Nut |
|---|---|
| Type | Threaded Rod Beam Clamp |
| Throat Depth | 5/8″ |
| Depth | 1-3/4″ |
| Load Limit | 500 lb |
What is a top beam clamp?
Figure: 345. Designed for attaching hanger rod to the top flange of a beam or bar joist where the flange thickness does not exceed 3/4” (19.05mm). The open U design permits rod adjustment. Material: Carbon steel with hardened steel cup point set screw and locknut.
How much weight will a 3/8 beam clamp hold?
400 lb
3/8″ C-Clamp Style Beam Clamp
| Style | C-Clamp with Nut |
|---|---|
| Type | Threaded Rod Beam Clamp |
| Throat Depth | 5/8″ |
| Depth | 1-3/4″ |
| Load Limit | 400 lb |
What is the capacity of beam clamp?
BS 1139 Beam Clamp, Size/Capacity: 2″
| Size/Capacity | 2″ |
|---|---|
| Brand | BS 1139 |
| Bolt Type | Eye Bolt |
| Weight | 1.100 Kgs |
| Minimum Order Quantity | 100 |
What is a window clamp?
PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Window Clamp are used to attach strut at a 90˚ angle to a beam or structural member.
How do you calculate scaffolding load?
The type of scaffolding being used is rated as light-duty, or 25 pounds per square foot. Multiply 35 square feet by 25 pounds per square foot and the scaffolding can be loaded with no more than 875 pounds.
What is the maximum load for a scaffold?
The maximum load for each section of a light load scaffold is 225kg. Anything over this could cause the scaffolding to become unstable and possibly break.
How many types of scaffolding clamps are there?
Types of scaffolding clamps: It has three types according to its fundamental mechanical differences. They are: Tube and coupler scaffolding. H-frame / facade scaffolding.
Are scaffold swivels load bearing?
Swivel Couplers are load bearing fittings which connect two 48.3mm outside diameter scaffold tubes at any angle. These fittings are particularly used for façade, sectional or plan bracing.