How does Ideal Standard dual flush valve work?
Dual flush toilets employ a larger trapway (the hole at the bottom of the bowl) and a wash-down flushing design that pushes waste down the drain. Because there’s no siphoning action involved, the system needs less water per flush, and the larger diameter trapway makes it easy for waste to exit the bowl.
Are toilet flush valve universal?
No. Toilet flush valves come in a variety of sizes, and there are also several types, including standard, tower- or canister-style, and dual flush valve.
Are flush valves standard size?
A flush valve is a part inside the tank of a toilet that moves the water into the bowl. Toilet flush valves come in different sizes ranging from 2 to 4 inches, depending on the toilet design.
Are dual flush toilets hard to repair?
Replacements may also be more difficult with dual-flush models, as they are built differently than the standard American single-flush toilet.
What is standard toilet supply line size?
Typically they are 3/8” in diameter, but toilet supply line size can vary in length, usually anywhere from 9” to 20”.
How do you fix a low flow toilet that keeps running?
To lower the water in a toilet with a float arm, loosen or tighten the screw until the float arm lowers. To lower the water in a toilet with a column float attached to the fill valve, loosen the screw or clip, push down the float, and tighten everything back up again.
What size water supply line do I need?
In the case of a three family house an 1 1/2″ service line is typically required. Again the exception would be if the length of the run of pipe was only 35′ or less. In most cases a six family house or greater will require a 2″ water service line.
Can I use any flush valve?
All though there are many different types of flush valves most flush valves are interchangeable and depend on the size of the ceramic flush hole that is bored through the tank by the porcelain manufacturer.
What is the warranty on ideal standard flush valves?
The full range of Ideal Standard flush valves is shown below. As official Ideal Standard stockists, we are able to provide industry-leading customer support. All products are covered by our 30 day money-back guarantee as standard, as well as fast delivery. Please contact us for help should you need any advice.
How do you service a dual flush cistern valve?
Image shown for illustration purposes only. The Ideal Standard 1/2″ dual flush valve is designed so there’s no need to remove the entire cistern to service the valve. Simply twist the valve in an anti-clockwise direction to lift the mechanism out.
Why choose ideal standard stockists?
As official Ideal Standard stockists, we are able to provide industry-leading customer support. All products are covered by our 30 day money-back guarantee as standard, as well as fast delivery.