How far does a wood stove need to be away from a protected wall?
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
How far does a wood stove need to be away from a concrete wall?
Wall Protection Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall.
How do you protect a wall from a wood stove?
Faux Panels. A common way to help protect the wall behind a wood stove and create a backdrop for your stove includes using masonry veneer faux panels. Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room.
How much space should be between stove and wall?
A freestanding range (gas or electric) requires no space between it and the back wall. There should be at least twelve inches between any style range and the closest sidewall. There are still a few additional factors to consider regarding spacing between the kitchen range and adjacent walls.
How do I protect my wood stove from drywall?
Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead. Cut right through the drywall using a drywall saw.
How much space do you need on either side of a stove?
Allow at least 15 to 18 inches of counter space on one side of the oven. Allow counter space on both sides of the stove or stovetop – 12 to 18 inches on one side and 15 to 24 on the other.
What is code for wood burning stove?
Under NFPA 211: Clearances around residential “room heaters” (wood stoves) shall be not less than 36 inches above and around all sides, and with adequate legs and floor protection.
How much clearance do you need for a single wall stove pipe?
18 inches
For all single wall stove pipe the minimum clearance to combustible material is 18 inches. The minimum clearance may be reduced by 50% to 9 inches if suitable heat shielding is installed on the pipe or on the combustible material.
How close can a wall be to a fireplace?
36 inches
According to the National Fire Protection Agency (NFPA), a fireplace must be 36 inches away from bare walls. If the walls around the fireplace are protected by a heat-resistant material or some form of insulation, the fireplace can be less than 36 inches from the wall.
How close can drywall be to a fireplace?
The National Fire Code requires all combustible material to be at least 6 inches from the opening of the firebox. For every 1/8 inch of protruding combustible material, you must account for an additional inch of clearance.
How much space do you need on each side of a stove?
How much clearance do I need for single wall stove pipe?
How do you measure clearance for a stove?
In a nutshell, the stove is run through the complete test, the temperatures are recorded, and safe clearances are established. If the listed clearance to a bare, unprotected wall is 36”, then you would measure in a straight line from the stove to the wall. The same goes for corner installations—-straight line to the wall.
What is the minimum clearance from combustible walls and ceilings?
Table 1 shows the minimum clearances from combustible walls and ceilings. Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall.
How far should a wood frame stove be from the wall?
Wood frame walls covered with dry wall are considered combustible. If no wall protection is used, the common radiant-type stove or heater must be spaced out at least 36 inches from the wall. This distance may be reduced considerably if asbestos millboard and/or 28 gage sheet metal is used for wall protection.
How much clearance do you need for a chimney pipe?
Single wall chimney connector usually has a clearance of 18” from combustible walls. This limitation can often be overcome by the use of special double wall interior piping or stove pipe heat shields, either of which can reduce the pipe clearance to as little as 9”. All Wood Stoves, listed and unlisted, need protection on the floor.