What is the altitude of Great Bend Kansas?
1,850′Great Bend / Elevation
How much does density altitude affect drag racing?
As a rule of thumb from a racing standpoint: For every 1000 ft. the Da goes up, a normally aspirated bike will typically slow down almost a tenth (actually right around eight hundredths or so = . 08) in the 1/4 mile.
What is da mean in drag racing?
Density Altitude is the actual track altitude above sea level, adjusted for the barometric pressure, ambient air temperature and relative humidity. And a high DA is what kills horsepower and results in high ETs and low trap speeds.
What is great bend Kansas known for?
Great Bend is the site of the Central Kansas Medical Center and Barton County Community College (1965). The city also has a free municipal zoo. Cheyenne Bottoms Wildlife Area and Pawnee Rock State Historic Site are nearby.
What is great bend known for?
Located on the Santa Fe Trail, Great Bend is the birthplace of organized drag racing and the boyhood home of a Nobel Prize winner. The Raptor Center at Brit Spaugh Zoo houses raptors, byway exhibits and educational programming.
How much does altitude affect horsepower?
As a general rule, a naturally aspirated combustion engine will lose 3% of its power for every 1,000 ft of elevation gain. If you have 100 horsepower at sea level by the time you get to 5,000 feet of elevation your engine is making 85 horsepower. At 10,000 feet of elevation your engine will make 70 horsepower.
How much does elevation affect horsepower?
Does density altitude affect turbo cars?
The bottom line: Density altitude affects even a turbocharged engine, though perhaps to a lesser extent than a normally aspirated powerplant. If all you do is fly a lightly loaded airplane from airports with lengthy runways at or near sea level, you rarely need to worry too much about density altitude.
Why is great bend called great bend?
The community, founded in 1871, was named for the great bend in the course of the Arkansas River where large herds of bison once watered.
How did great bend get its name?
Great Bend History The city of Great Bend derived its name from the Great Bend of Arkansas River. The early settlers arrived in Great Bend in the year 1870 and practiced farming for their livelihood. D. N. Heiser and E. J. Dodge made the first settlement in Great Bend township in the year 1871.
Which engine is best for high altitude?
“Thus, the diesel engine is still more efficient than the gasoline one at high altitude,” says Cheng. So the next time you’re headed to the mountains, leave the gasoline-powered car at home and save a few pennies on fuel.
How much HP do you lose per 1000 feet?
3%
As a general rule, a naturally aspirated combustion engine will lose 3% of its power for every 1,000 ft of elevation gain. If you have 100 horsepower at sea level by the time you get to 5,000 feet of elevation your engine is making 85 horsepower.
What altitude do cars stop working?
Generally speaking, you can expect a car to lose around three horsepower for every 1,000 feet you climb. That means that your car could lose around 20 percent of its horsepower if you were to drive from sea level and up a mountain like Big Bear, which has an elevation of 6,750 feet.
What river is great bend Kansas on?
the Arkansas River
Great Bend, city, seat (1872) of Barton county, central Kansas, U.S. Great Bend lies on the Arkansas River where the High Plains begin to shade into tallgrass prairie.